Get matched with top locksmiths in Signal Hill, CA

When you take a key to a hardware store or a locksmith for copying, you can expect the key-cutting process to take as little as 30 seconds. The key copier will review your current key to decide on the correct blank. Then, your original key and the blank are inserted into a key duplication machine to cut an exact key copy. When it’s all said and done, you can have a new key in your hand in just a couple of minutes.

Newer, electric-powered door locks generally have a life span of five years or less. That’s thanks, in large part, to a phenomenon called planned obsolescence, in which products are programmed to need replacing after a certain amount of time. That’s also why older, manual, push-key locksets can last up to 30 years with regular cleanings and maintenance. When it does come time for a new set-up, know that the cost to change locks ranges from $130 to $500 on average.

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.

Yes. Most deadbolts purchased from a home improvement store include a step-by-step installation template that is easy to follow, even for novice DIYers. One of the most important steps for successful deadbolt installation is having the proper tools to start with and carefully measuring prior to any attempts at installation.