Get matched with top french drain pros in Lodi, CA

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If your washing machine drain is clogged, that isn’t a good sign. Unlike toilet drains or kitchen sink drains, there isn’t matter that is easily broken up with a plumbing snake, and more care is required. If you’re in an old house or have mineral-rich water, there could be a buildup inside the pipe. Either way, if the blockage isn’t obvious and doesn’t dislodge with a snake, you need to call a pro—otherwise, you risk damaging integral plumbing.

No. You should dispose of all oil-based finishing products through a local hazardous waste program. Not only can oil-based finishes be hazardous for the environment if disposed of in the sink, but they can cause clogs in your pipes and stop up your drains. Most municipal garbage or waste disposal companies have a specific location or pick-up schedule for hazardous materials, so that’s your best bet to get rid of excess finishing products.

You can drain a hot tub very quickly by using a submersible pump rather than the hose-sized drain at the bottom exterior of the tub. A pump can move up to 30 gallons per minute, draining your hot tub in no time. Using the regular drain can take up to two hours.