Best french drain pros near Rogers, AR

This depends on the location of the blockage. If the blockage is in your home’s system, anywhere in the system, it is your responsibility as a homeowner. Blockages seldom happen because of items or buildup coming from the city, which means it originates in the home. It becomes the city’s responsibility at the exact point your home’s line distributes waste into the city’s system. The exception is if the problem in your home damages the city lines.  

Yes, you can pour water down the toilet to help it flush. For each flush, you’ll need 1 to 2 gallons of water for newer toilets or 3 to 5 gallons of water for older toilets. Rather than dumping the entire bucket in all at once, pour the water in slowly for the best results. If you’re pouring water down the toilet to help it flush after a clog, only use 1 gallon of hot water.

Start by unscrewing the overflow valve, which is located on the wall of your tub between the floor drain and the tub spout. Gently insert a plumbing snake down into the pipe, move it back and forth, and pull it out. Remove any hair, debris, and soap scum that comes out with it. Repeat the process until the snake comes out clean, and then reinstall the cap on your overflow valve.

A saturated leach field can result from various underlying issues, so it's best to call a professional septic company to diagnose and treat the problem. Depending on the cause of the saturation, potential fixes include pumping out a full septic tank, adding more bacteria to the tank, or regrading the soil to fix low spots. It may also be necessary to reroute rainwater and runoff away from the leach field using gutters, downspouts, and extenders. Once the primary issue is resolved, planting specific types of vegetation over the area can help absorb excess water. In more severe cases, you might need to install a larger septic tank or replace the leach field entirely.