Get matched with top concrete driveway pros in Pottsville, AR

Yes—as long as the area has been properly prepped. Different self-leveling brands and compounds have their own specific instructions for preparation; some may require that you add primer or grind the surface. Without proper preparation of the surface, the compound will not be able to fully bond to the concrete and fill the cure as a separate layer, which makes it prone to chipping.

Most of the time, you or your contractor will spray the concrete form and framework with a release agent or oil to prevent sticking. This is common practice with wood and steel forms. For insulated concrete forms, the styrofoam formwork often remains in place after construction, so you don’t need to treat it beforehand. Foam concrete forms made out of melamine also may not need treatment beforehand, as the material naturally won’t stick to the concrete after it’s cured.

If the moisture level in your concrete flooring is higher than what is acceptable for your primer or flooring materials, then you are looking at dealing with major flooring issues down the road. From mold and mildew, to warping, buckling, bubbling, and soft spots, you could see a wide range of moisture-induced problems.

These issues can affect not just your flooring but your foundation too. That is why measuring moisture in concrete is so important before starting a project.

Yes, you can remove oil stains from your driveway by applying an absorbent material such as baking soda, sawdust, or cat litter, pouring on a liquid detergent such as dish soap, scrubbing the area, and rinsing with water. You can also use a diluted bleach solution, white vinegar, or TSP solution on concrete.