"Brian installed the panel and ran wiring at our hunting cabin. He did a great job, and was a a good sport about it being such a remote location.
More recently, our lights and appliances were not working correctly. I called him and he was at our home in under 90 minutes, made sure everything was okay on our end, and stayed with me until the electric company arrived to fix the power lines outside our home.
I definitely would recommend this company! They are the best!"
"The problem turned out to be a burned out small electric door switch. I believe the price was way too expensive for the service performed and the price of the door switch. What more can I say? It got done."
We are the experts in the field of Whole Home Generator Sales and Installation, with over 20 years of experience in the game. We provide turn-key installation by licensed professionals - 24 hour emergency service - Remote Monitoring - Long term maintenance and service by factory trained technicians.
"Very professional, personable and trustworthy. Did a fantastic job fixing our electrical problems. If anyone needs an electrician, best company in Fort Smith."
Generators are safe to use as long as they are installed and operated correctly according to the manufacturer's recommendations. The most critical safety tips are to never use a portable or fuel-powered generator inside an enclosed space due to the risk of lethal carbon monoxide poisoning; always operate it outdoors where fumes can dissipate away from your home. Additionally, never attempt to connect a generator to your home’s electrical panel yourself—hire a professional to ensure the setup meets safety standards. Finally, avoid overloading the generator by not connecting more appliances than it is rated for, as this can damage your equipment or cause a fire.
There are several indicators that a single-pole switch is bad: the switch is warm or hot to the touch, sparks are sometimes present when turning the switch on or off, you hear a buzzing sound or other weird noise coming from the switch, the connected light flickers when you turn on the switch, and the light doesn't turn on at all with the switch. If you notice any of these, replace the switch or call a pro straight away.
Yes—if a breaker is old or damaged, it might not be able to detect power surges or electrical overload. If that happens, the breaker won’t trip. Instead, it will begin to overheat, putting your electrical system at risk of fire or total electrical failure. Circuit breakers don’t last forever, so you can proactively replace old or damaged breakers before they stop working.
If the outlet is a GFCI model, this is normal since these outlets have their own breakers that shut off when they encounter a problem—just hitting the reset button should solve the issue. Otherwise, the outlet could have bad wiring, or your circuit breaker could be having issues. If the issue started out of nowhere and is not on a GFCI outelt, it’s best to contact an electrician to diagnose the issue.
To upgrade electrical systems in older homes, you might need to reroute new wires with lath and plaster walls. That’s because it’s more challenging to get inside the walls of an older home compared to a modern home, which usually uses drywall. But there are easier ways to level up your electrical game in an older home. For instance, you can swap out an old furnace for a new electric heat pump, or you could use a heat pump for water heating.
The Paris, AR homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
