Best carpenters near Kenai, AK

"What a high quality product! They called to double check some of the self-measuring I had done; all pieces came in the perfect size. The top finishes of the pads are so attractive that I leave the round one on my heavily-used dining room table on all the time."

Here at Alliance Finish Carpentry we are a fully licensed and insured contracting company working with residential and commercial properties. No job is too large or small for us and we pride ourselves on our professionalism and skillset.

"I contacted Jim Burke of Crestone about making a small repair to the 2nd floor deck of my house. After checking more thoroughly it was found there were a number of boards with significant decay. Many of the boards were so bad, there was nothing to hold a screw or nail. The small repair I had in mind would have left the deck dangerous, still not meeting building codes, and would have staved off replacement by only a year or two. Steve, the project manager, made suggestions that resulted in a more through repair and when a glitch was discovered part way though, a modification was made that resulted in an even stronger better looking finished product. Over 30+ years I worked over-seeing a variety of contractors who did every imaginable aspect of construction and maintenance work on the large office building I managed. The scope of the projects varied from adding or removing a door or two to adding 5,000, 10,000, and 20,000 square foot, two story additions to the building. The Crestone workers were as good or better than any I worked with. The workers showed up promptly every day, stayed on the job, and completed it without delay. Once they worked all day in a driving rain. They stayed on the job continually and took only a short lunch break. The workers thoroughly cleaned up at the end of every day and hauled away debris. In recent years I have wondered how projects get completed as the new acceptable standard appears to be that workers talk and text on their cell phones throughout the workday and take frequent smoke breaks. I saw Crestone’s employees making or taking a phone call only once or twice during the 6 day period and never saw an employee smoking a cigarette. The Crestone labor rate is based on 100% productivity the entire work day without an inefficiency factor for cigarette breaks, talking and texting on cell phones, or breaking and wasting time talking among themselves. The deck looks better and is stronger than when it was originally built in 1991. It looks 100% better than my simple repair would have produced. The shaky, wobbly stairs and rail are now very solid. I highly recommend Creston General for any home or construction job and will call them first for any work I may need to have accomplished."

"Mr. Weaver ordered the glass and had the outside color of the paint matched from an old dry can I had left from the last paint job. The new glass came sooner than I expected and the job was done very quickly. It was a tough job to do as the windows were put in by an old system that used very tough glue making it hard to get the glass out of the wood frame without damaging it. Mr. Weaver had lots of experience with this kind of window and knew how to get it out. He arrived with a helper plus an electric type of cutter that he could insert along the glass to cut through the glue. The new glass looks terrific. The frames are still in good shape. The paint match on the outside is so close it is not noticeable.  He cleaned up thoroughly at the end and even cleaned and replaced my window pane thermometer in the kitchen. Great job - I highly recommend him.
"

Wess Carpentry LLC is dedicated to providing our customers with the best quality and craftsmanship. We are here to build relationships with our customers and communities and to provide our employees with a great place to work. We look forward to working with you!!!!!!!!

"They did an excellent job! They called before they came and made sure I was going to be home. They were very cordial and considerate--even cut an extra tree for me. I would recommend them to others."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"This service was exactly what I was looking for.  I wasn't confident about choosing the new look for my living room.  I wasn't sure what my "style" was, and what would look good together.  I needed a consultant to let me know if the items I was considering would look good together.  Amanda called me and we talked about what I liked/didnt like.  She had me post pictures from Pinterest and Houzz of rooms I liked.  From that she was able to tell me what my style was.  She noticed things I never realized before.  For example I apparently picked the exact style couch in every picture I posted.  As I found furniture I liked I would send her photos and she would let me know if she thought they would go good together.  For example she recomended a different coffee table - i needed one that was more substantial to balance the size of the sofa.  She also helped me fine-tune the paint colors for my walls - I thought this was the hardest part of designing the room, but I love the results. 
I was basically looking for someone to guide my choices, but they will also modify their level of service depending on what you need (cost varies depending on service needed).
I would positively use them again!!
"

"Jeff does great work from start to finish. He listened and understood the changes we wanted. He researched the most economical way to obtain the desired results without jeopardizing quality.
Jeff was able to build the indoor slide for the children's area by simply looking at a picture. He also made sure that every aspect of the slide was safe for the children to play on.
His finish work is excellent! We were especially pleased with the new offices and conference room. We couldn't ask for better sheetrock, mud, tape and texturing.
Jeff is a hard worker. He is punctual and has no problem staying late until the job is done.
My husband and I plan to use him for finish work on our cabin.

"

"Arrived at the end of the time frame given. Were in and out quickly. Happy with the outcome. Communication was intermittent."