Get matched with top well and pump technicians in Ringle, WI

The precharged pressure tank should start at around 28 psi. The two pressure settings of note are the cut-in and cut-out pressure. The well pump starts when the tank reaches the minimum cut-in pressure. It turns off when the tank reaches the maximum cut-out pressure. The desired water pressure in the household is usually a few psi above the cut-in number. The difference between the cut-in and cut-out pressure settings should be 20 psi. Typical settings for household applications include 20/40, 30/50, and 40/60.

The life span of a water pump ranges from five to 15 years on average. Regular maintenance can extend its life. If you notice significant drops in performance, strange noises, or frequent malfunctions, consider a water pump or well pump replacement. Always get in touch with a professional if you're concerned about yCan I install a water pump myself?our pump's condition.

Yes, you can shock a well yourself, but it can be dangerous if you don’t know what you’re doing. We recommend calling a pro, but if you decide to do it yourself, make sure to follow proper safety precautions. This means wearing the correct safety gear, such as rubber gloves, goggles, and boots. You should also mix the chlorine solution in an open area with plenty of ventilation. Also, make sure not to drink or use the water for a few days afterward, until you’ve flushed the system and retested the water.

Servicing includes cleaning filters and coils, checking coolant levels, and inspecting electrical connections.