Get matched with top asphalt driveway pros in Bancroft, WI
Top-rated asphalt driveway pros.

Need a pro for your asphalt driveway service project in Bancroft, WI?

Select your specific project to find the pro for you.

Find Asphalt driveway pros in Bancroft

Avatar for Jorge's Lawn Care
Jorge's Lawn Care
4.8(
6
)

Serving Bancroft, WI and surrounding areas

Approved

In business since 2019

Free estimates

Warranties offered

"They removed all mulch beds and a lot of shrubs. They replaced the mulch with new fabric and added rock. The weather was hot and humid but everything was finished in 2.5 days. It is exactly what I wanted."
White Marble Project
Planter Bed Turf
Natural Gray Veneer Steps
Clean and Natural
Back yard Upgrade

+96

4 neighbors recently requested a quote
Recommended by66%of homeowners
Showing 1-10 of 40
Asphalt Driveways questions, answered by experts

An asphalt driveway should be at least 3 inches thick over a compacted gravel base. Areas with poor drainage should have a thicker stone base. To install a new asphalt driveway over an existing driveway, the new asphalt should be at least 2 inches thick and the existing driveway should be in relatively good condition.

Gravel is one of the few driveway materials that can handle rain the second it’s installed. Unlike asphalt, which needs days to set, or concrete, which requires weeks to cure, gravel is ready as soon as it’s compacted. It’s naturally permeable, allowing water to drain straight through—with no risk of pooling or surface damage. Gravel driveways are one of the most affordable, at $1 to $3 per square foot, and can also last upward of 100 years.

The answer to whether or not you need to get a permit before you start your driveway can vary widely based on local ordinances and the scope of your driveway ideas. In most urban and suburban areas, a permit is needed before building a new driveway to ensure that a homeowner is using safe materials and proper drainage practices while designing and constructing a new driveway. In some rural areas, a homeowner may not be required to apply for a permit. When building a new driveway on your own, always check with your local building department to see if you need to request a permit. When hiring a driveway contractor, verify that the right permits are being used before driveway construction begins.

Wet cutting is usually the preferred method. It controls dust, which helps protect your lungs and makes for a cleaner working environment. Plus, the water cools the blade, preventing overheating and prolonging its life while providing smoother, more precise cuts. The downside is the mess—water and asphalt sludge can be messy to clean. Dry cutting, though convenient if water isn’t available, creates a lot of dust, which can be harmful. This also increases the risk of blade damage due to overheating. So, if you have the option, wet cutting is the better method for most asphalt jobs.

While some areas may allow for a slope of up to 20%, this is often the maximum slope for driveways, with a few exceptions of up to 25%. Other regions may have a maximum of 12%, 15%, or 18%, so check with your local building department to ensure you’re laying a driveway that is up to code for your location.

The Bancroft, WI homeowners’ guide to asphalt driveway services

From average costs to expert advice, get all the answers you need to get your job done.