"The original roof on this house was done in 1950 and was not done by Inland Roofing. This is the 3rd roof on our house that Inland Roofing and Supply, Inc. has done 1975, 1996, and 2024. They do a fine job every time. This year it was John Edwards, Hayden, Cory, and another John who does a fast and efficient job on the new shingles. They are all very courteous, professional, trustworthy, reliable, and they all cleaned up all the debris each day which we appreciated. Inland Roofing and Supply, Inc. is the best company!!!"
"Excellent roof and experience! Thankfully, they were able to squeeze us in between other jobs and they tore off our old roof and put on a new roof and left our place nice and clean. I would 100% hire them again."
"Bryan was excellent in explaining the process of our new roof installation. He also did a great job showing us the new roof products and explaining how the whole procedure would be done."
"JC removed our old leaky tar and gravel carport roof and replaced it with a new metal roof instead. From start to finish, JC kept us up-to-date every step of the way and happily answered all questions we had. Even when it was discovered that there were extra repairs needed, he communicated and helped us understand. The team was quick and constantly kept the workspace clean of debris. The new metal roof is beautiful and I will be using him again when I need to replace the rest of our roof. I would highly recommend JC and Roof Above for all of your roofing needs."
"Full time Contractor exceeded our expectations for a roof replacement. It was an easy and straightforward process to define and schedule our new roofing project. Jason Olinger took us through the process and the roofing workers followed up with excellent service. Our project was completed ahead of schedule with meticulous clean up."
"ErieHome waterproofed my basement. The crew was polite, kind, and came in, did an excellent job in 3 days by digging a trench on the inside of the basement, removing the dirt from the bottom of the foundation, installed corrugated tubing, rock and then cement. They also installed a Humidex airpurifier and new sump pump with a backup pump. They cleaned up afterward. Any questions I had were answered in a respectful manor. I now have peace of mind knowing that I no longer have to monitor weather forecasts for rain or have to clean up anymore incoming water. The system is warranted for the life of the house and included within the price, which increased the value of my home."
"Elias Contruction provided a detailed estimate after inspecting the roof and making some qualified recommendations. The project required a few change orders that were not clarified in writing. I would recommend hiring Elias if you get changes in writing. They cleaned up pretty well although they missed a few things due to finishing in the dark. Overall satisfied with the job and cost was 60% of other bids due to sheathing adjustment."
The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:
Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.
Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.
If you’re building the roof trusses yourself, which isn’t recommended, it will be more affordable than buying pre-built trusses. Trusses cost more because they use the same amount of material, but you’ll also be paying for the labor, as well as the delivery to your home. However, if you’re having a contractor build the roof for you, then trusses will be less expensive, as the labor costs to build roof framing on-site will cost more.
Roofing estimates vary for many reasons, but the most significant ones include differences in the cost of labor based on the contractor’s experience and overhead costs, as well as the quality of the materials your roofer will use for the job. You should get your estimates itemized and make sure your contractors include details about the materials they plan on using. Doing so allows you to compare not only based on the cost but also the value that you’ll get for your money.
Winter is the least expensive time of year to replace a roof due to decreased demand. However, it’s not an ideal time to replace your roof, as there are numerous factors that can inhibit the work, including shorter days, snow and ice, and cold temperatures.
No, cool roofs are not suitable for all climates. Cool roofs are very good at reflecting solar heat, so they’re suitable for homes in warm or hot climates. However, they’re not good at retaining heat, so they’re not suitable for homes in cold climates.
The Harrington, WA homeowners’ guide to roofing services
From average costs to expert advice, get all the answers you need to get your job done.
A new roof improves curb appeal, increases home value and keeps your living space protected from the elements. Learn about average roof replacement costs to set your budget.
Building a roof is a serious but rewarding project. If you're up to the task, use this step-by-step guide to learn how to build a roof without the help of a contractor.
Roof leaks are an emergency, so knowing who can tarp your roof quickly and correctly can save you from major water damage if you ever experience a leak.
