Best siding pros near Freeland, WA

Siding and cladding are two popular exterior wall coverings that protect homes from the elements and provide insulation, but they differ in design and application. Siding is applied directly to a home’s exterior, providing some insulation and basic shielding from the elements. In contrast, cladding is installed indirectly over furring strips, creating a ventilated air gap for enhanced insulation and moisture control.

You should plan to stain or refinish your home's cedar siding every three to seven years to maintain its appearance and provide maximum protection, though some estimates suggest a range of four to six years. The exact frequency depends on several factors, including your local climate, exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the overall condition and quality of the wood.

For homes in harsh climates with high humidity and significant sun exposure, you should plan on staining as often as every three years, while those in milder locations may only need to do so every seven years. For the longest-lasting protection in particularly harsh climates, consider using an opaque stain.

If you are looking for a lower-maintenance alternative, you might consider vinyl or aluminum siding. While the initial installation cost can be higher, they do not require as much upkeep and can offer more value over time, especially in areas with excessive rainfall or high humidity.

The lifespan of siding ranges from 20 to over 100 years, depending heavily on the material, climate, quality of installation, and maintenance.

• Vinyl, Wood, and Aluminum: Typically last 20 to 40 years. Engineered wood may need replacement after just 20 years.

• Fiber Cement: Lasts around 50 years.

• Brick and Stone: These are the most durable, lasting for a century or more with proper care.

The longevity of any siding can be shortened if it's not properly maintained or if damage is not repaired promptly. Regular cleaning is vital. It's time for a replacement when you see widespread damage, signs of water intrusion, or a spike in energy costs.

You cannot install clapboard siding on a bare, unprepared surface. Clapboard siding requires a clean, sturdy base made from plywood or similar materials, sometimes called backerboard. Then, it needs an underlayment or sheathing, a moisture membrane to help protect the exterior wall.

Note that sometimes clapboard siding is caulked as it’s installed for additional protection. We don’t suggest this: Caulking the siding can trap moisture inside the clapboards and lead to moisture damage over time. The siding needs some space to “breathe,” especially in rainy weather.