Top-rated chimney repair specialists.

Get matched with top chimney repair specialists in Concrete, WA

Enter your ZIP and get matched with up to 5 pros

Need a pro for your chimney repair project in Concrete, WA?

Select your specific project to find the pro for you.

TRUSTED BY CONCRETE, WA HOMEOWNERS

  • Average homeowner rating star icon4.8
    Average homeowner rating
  • Verified reviews icon16
    Verified chimney repairs reviews

Find Chimney repair specialists in Concrete





"Casey worked with our renters and went above and beyond to ensure they were happy with the project. The fence looks great and was installed quickly and professionally"

Jonathan M on May 2021

Owner operated. No subs. Travel charges may apply. Extra charge for after hours service. Free estimates.

"Casey worked with our renters and went above and beyond to ensure they were happy with the project. The fence looks great and was installed quickly and professionally"

Jonathan M on May 2021



Avatar for Archstone Masonry

Archstone Masonry

4.82(
192
)

Archstone Masonry

4.82(
192
)
Customers say: Super punctual
Recommended by 94% of Angi customers
Recommended by 94% of HomeAdvisor customers

Super Service Award wining company on Angie's List. Archstone Masonry was founded by Jerrod Rhynalds in 2001, shortly after he took two first place victory’s in state and regional masonry contests. If you’re looking for a high quality masonry contractor, you’ve come to the right place. We at Archstone Masonry strive to be one of the best masonry contractors in the northwest. We employ some of the best stone and brick masons to make sure your project exceeds your expectations. We continue to be highly rated on Angie’s List since joining in 2011 and strive for customer satisfaction. Let us help you design/Install your next masonry project.

"Jerrod the owner of Archstone was emphatic to point out that he is one of the best if not the best and a very conscientious and honest man. He said the mortar on exterior house wall is very hard and can't be ground out. Per his expert advise the best things is pressure wash and scrape out loose and damaged mortar and use sponging technique to fill in cavities with type S mortar. I understood and agreed asking for care with pressure washer. Quote was $2922 before tax. He said the wall wouldn't look much better than it does now but he would get all the places having egregious deterioration and then seal. Two days work. Moving forward his team (him and a 18 year old nephew) came and went in less than 4 hours. Sealant remained to be done and I could see that cost was itemized at $400. I personally could do it in 1/2 hour so I asked him to scratch it from the price. He was very amenable to that. The issue arose when I was sealing I found and sent him photos of spots with severe erosion that were missed and should take about 1 hour to fix. Some on wall, one in bottom corner of house, one big seam in windowsill. I sent email and photos asking for him to return. He didn't reply. 1 week later I reached him by phone and he said he didn't get the email/or hadn't read it yet but he wasn't going to come back for 'pinholes' which I could do myself. First of all I could do everything myself but that's time that I paid him for. He is too busy to come. Photos are from the south wall as discussed."

Helen K on September 2022

Super Service Award wining company on Angie's List. Archstone Masonry was founded by Jerrod Rhynalds in 2001, shortly after he took two first place victory’s in state and regional masonry contests. If you’re looking for a high quality masonry contractor, you’ve come to the right place. We at Archstone Masonry strive to be one of the best masonry contractors in the northwest. We employ some of the best stone and brick masons to make sure your project exceeds your expectations. We continue to be highly rated on Angie’s List since joining in 2011 and strive for customer satisfaction. Let us help you design/Install your next masonry project.

"Jerrod the owner of Archstone was emphatic to point out that he is one of the best if not the best and a very conscientious and honest man. He said the mortar on exterior house wall is very hard and can't be ground out. Per his expert advise the best things is pressure wash and scrape out loose and damaged mortar and use sponging technique to fill in cavities with type S mortar. I understood and agreed asking for care with pressure washer. Quote was $2922 before tax. He said the wall wouldn't look much better than it does now but he would get all the places having egregious deterioration and then seal. Two days work. Moving forward his team (him and a 18 year old nephew) came and went in less than 4 hours. Sealant remained to be done and I could see that cost was itemized at $400. I personally could do it in 1/2 hour so I asked him to scratch it from the price. He was very amenable to that. The issue arose when I was sealing I found and sent him photos of spots with severe erosion that were missed and should take about 1 hour to fix. Some on wall, one in bottom corner of house, one big seam in windowsill. I sent email and photos asking for him to return. He didn't reply. 1 week later I reached him by phone and he said he didn't get the email/or hadn't read it yet but he wasn't going to come back for 'pinholes' which I could do myself. First of all I could do everything myself but that's time that I paid him for. He is too busy to come. Photos are from the south wall as discussed."

Helen K on September 2022


Avatar for Topside Roofing & Siding

Topside Roofing & Siding

4.00(
28
)

Topside Roofing & Siding

4.00(
28
)
Customers say: Super punctual
36 years of experience

Topside Roofing & Siding is a trusted local contractor serving Whatcom, Skagit, and San Juan counties with expert roofing, siding, window, and deck replacement services. With decades of experience, our certified team provides quality installations, roof replacements, and repairs that protect your home from the Northwest weather. As the only GAF Master Elite® Contractor in Whatcom County, we offer industry-leading warranties and peace of mind on every project. From residential to commercial work, homeowners count on Topside for professionalism, reliability, and lasting results.

"I contracted Topside Roofing and Siding for a major, full re-roofing project in late January/early February 2023. My initial experience of them was that they were certainly the most expensive bid, but had the best quality assurance, responsiveness, and expertise about the issues I was having with my roof. The roof replacement was certainly professional, expedient, and clearly improved all issues that had plagued my roof prior to their work. For that quality of work, I would have given them full marks. However... Following the completion of the work, there have been several issues that have arisen: First, multiple types of debris (a sharp cut metal piece that my dog began to eat before my wife took it and sliced her knee, dozens of rusty roofing nails, dozens of pieces of plastic from roofing material) were left after the job was finished, in spite of the signed contract indicating they would clean up all materials. When called for the cut piece of metal, they denied it was theirs; it perfectly matched the metal used on the roof... Even after they responded and came back to do more clean up for the nails/plastic, there was still debris remaining around the perimeter of my house. Second, and more importantly, approximately two weeks after completion of the project, my hot water heater ceased functioning showing an indicator for an obtrusion in the venting. The company that installed my hot water heater did a service call, pulled out the debris blocking the venting, which turned out to be old roofing material. When the job was in progress I remembered one of the crew members using a leaf blower to remove excess material from the roof; I also noticed they had not put any type of plastic over the venting to ensure nothing was forcibly blown into it. When I called Top Side to address this issue, it took nearly 6 weeks of intermittent and dismissive communication to actually have this issue addressed. When Duane, a manager, spoke to the owner, Phil, the verdict was that, from the photos, it looked like "bugs" had gotten into my venting. When I assured them that the service company and myself had seen the material and it was certainly roofing material (which is evident from the photos, again, Top Side roofing denied it was their responsibility. Had it just been the quality of the job, I would have happily recommended this company to anyone who asked. Based on the above issues, I highly recommend that you avoid Top Side Roofing if you hope to contract company that maintains contractual obligations and provides adequate customer service should the need arise."

James M on June 2023

Topside Roofing & Siding is a trusted local contractor serving Whatcom, Skagit, and San Juan counties with expert roofing, siding, window, and deck replacement services. With decades of experience, our certified team provides quality installations, roof replacements, and repairs that protect your home from the Northwest weather. As the only GAF Master Elite® Contractor in Whatcom County, we offer industry-leading warranties and peace of mind on every project. From residential to commercial work, homeowners count on Topside for professionalism, reliability, and lasting results.

"I contracted Topside Roofing and Siding for a major, full re-roofing project in late January/early February 2023. My initial experience of them was that they were certainly the most expensive bid, but had the best quality assurance, responsiveness, and expertise about the issues I was having with my roof. The roof replacement was certainly professional, expedient, and clearly improved all issues that had plagued my roof prior to their work. For that quality of work, I would have given them full marks. However... Following the completion of the work, there have been several issues that have arisen: First, multiple types of debris (a sharp cut metal piece that my dog began to eat before my wife took it and sliced her knee, dozens of rusty roofing nails, dozens of pieces of plastic from roofing material) were left after the job was finished, in spite of the signed contract indicating they would clean up all materials. When called for the cut piece of metal, they denied it was theirs; it perfectly matched the metal used on the roof... Even after they responded and came back to do more clean up for the nails/plastic, there was still debris remaining around the perimeter of my house. Second, and more importantly, approximately two weeks after completion of the project, my hot water heater ceased functioning showing an indicator for an obtrusion in the venting. The company that installed my hot water heater did a service call, pulled out the debris blocking the venting, which turned out to be old roofing material. When the job was in progress I remembered one of the crew members using a leaf blower to remove excess material from the roof; I also noticed they had not put any type of plastic over the venting to ensure nothing was forcibly blown into it. When I called Top Side to address this issue, it took nearly 6 weeks of intermittent and dismissive communication to actually have this issue addressed. When Duane, a manager, spoke to the owner, Phil, the verdict was that, from the photos, it looked like "bugs" had gotten into my venting. When I assured them that the service company and myself had seen the material and it was certainly roofing material (which is evident from the photos, again, Top Side roofing denied it was their responsibility. Had it just been the quality of the job, I would have happily recommended this company to anyone who asked. Based on the above issues, I highly recommend that you avoid Top Side Roofing if you hope to contract company that maintains contractual obligations and provides adequate customer service should the need arise."

James M on June 2023


Avatar for Sundance Energy Svcs Inc

Sundance Energy Svcs Inc

4.54(
370
)

Sundance Energy Svcs Inc

4.54(
370
)
Customers say: Super punctual
44 years of experience

Trust is important—especially when you're hiring someone to come into your home to repair or install expensive heating and cooling equipment. People all over Washington, including King, Snohomish, Skagit, Whatcom and Island Counties, have given us their trust for the past 30 years because we have committed ourselves to providing quality service and the very best value on every visit we make. And we promise the same quality for you and your family.

"They were the first to respond to my call. Pricing was very competitive. They did a great job and I am excited for the warm weather this year."

Frank A on June 2024

Trust is important—especially when you're hiring someone to come into your home to repair or install expensive heating and cooling equipment. People all over Washington, including King, Snohomish, Skagit, Whatcom and Island Counties, have given us their trust for the past 30 years because we have committed ourselves to providing quality service and the very best value on every visit we make. And we promise the same quality for you and your family.

"They were the first to respond to my call. Pricing was very competitive. They did a great job and I am excited for the warm weather this year."

Frank A on June 2024

Chimney Repair questions, answered by experts

How long it takes to repair a roof depends on damage, but in general you can expect roof repair to take a few hours to a few days. For example, replacing damaged shingles can take between one and four hours. Structural repairs, like fixing a sagging roof, can take up to four days. 

The costs of sheet metal repair vary, generally between $200 and $600, depending on the extent of damage, material type, and complexity of the repair.

Metal roofs can rust, but steel is a material that holds up well to environmental factors, especially if it’s painted or galvanized. One of the main determining factors regarding rust is the environment the roof is in. Harsher environments with a lot of salt in the air will rust much more quickly than a steel or metal roof in a dry climate. Zinc-coated steel, called galvanized steel, is excellent at preventing rust from forming.

The average cost of welding is about $300 per project. Welding project costs range from $125 to $490 on average, depending on the type of metal, the size and complexity of the project, and your geographic location. On the low end of the price range, you might pay $50 up to $1,200 or more. The type of metal rods used and the welding method also factor into the project’s overall cost.

Issues include leaking seams, rusting panels, loose fasteners, and denting from debris or weather, which can cause damage that requires intervention.

The Concrete, WA homeowners’ guide to chimney repairs

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"