Get matched with top fencing pros in Catawba, VA

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

Galvanized metal, vinyl, and composite fences are known to be the longest-lasting options, often surviving for over 30 years with proper care. Metal fences, including galvanized chain link and aluminum, can look great for decades because the galvanization process adds a protective coating that resists weather and pests. Similarly, vinyl and composite materials are resistant to pests and can withstand harsh weather for many years. In comparison, a typical wood fence lasts about 15 years, and a standard vinyl fence has a lifespan of 20 to 30 years.

Ideally, your concrete should set slightly above ground at an angle sloping away from the fence post. This will add extra support and allow water to run away from the wood fence post. Keeping water out will help prevent wood rot. Additionally, you can add soil on top of the concrete for a seamless finish. 

A fence gate can sag for several reasons. The issue often stems from the hardware, such as damaged or bent hinges, or loose screws that can no longer support the gate's weight. The gate frame itself might also have come out of square due to failing supports. Alternatively, the problem may not be the gate but the supporting fence post, which could be leaning or out of place. In many cases, fixing a sagging gate is as simple as tightening the hinge screws or upgrading to more robust hinges.