Get matched with top toilet pros in Axton, VA

You generally cannot replace a 10-inch rough-in toilet with a 12-inch model without making significant plumbing updates. A 12-inch rough-in toilet will not fit a 10-inch rough-in space because the floor drain is in the wrong position. To accommodate the larger toilet, you would need to move the drainpipe, which could cost between $0.75 and $30 per linear foot, plus labor. In most cases, it is more cost-effective and simpler to purchase a new 10-inch rough-in toilet. However, it is possible to install a 10-inch rough-in toilet in a 12-inch space by using a longer connector.

The average cost to hire a plumber is typically between $45 and $200 per hour, with a common average rate around $125 per hour. This cost can vary based on your location, the plumber's experience, and the complexity of the job. Rates are often broken down by experience level: an apprentice may charge $45 to $90 an hour, a journeyman $60 to $110 an hour, and a master plumber $80 to $200 an hour. While hourly rates are standard, some plumbers may charge a flat fee for routine projects or offer project-based pricing. It's also common for plumbers to charge a minimum service or trip fee. For reference, some typical flat-rate costs for common jobs include: drain unclogging ($220), leaky faucet repair ($270), burst pipe repair ($400), toilet repair ($300), and water heater repair ($600). Note that these rates are for standard service hours; emergency, holiday, and after-hours calls will cost significantly more.

If you notice that your toilet is leaking puddles near the base, the leak is coming from your toilet bowl, and the water could be unsanitary. This is a situation that needs to be dealt with immediately—call a nearby plumbing repair pro right away. A contained leak from tank to bowl is not as urgent a situation, but it could be raising the cost of your water bill—have it looked at as soon as you can.

The first step to clearing the air in a line is to locate the cause. This is usually a blockage in either the drain or the venting system. Once you clear the issue, flush the system by actually flushing the toilets repeatedly. This should allow the trapped air to escape, thus clearing the lines. Don’t be surprised if there is increased bubbling as the air makes its way through the system.