Get matched with top toilet pros in Quinlan, TX

If you don’t replace a toilet flapper, your toilet tank will continue to empty and fill repeatedly, wasting water and running up your utility bills. Checking the flapper is a good first guess when dealing with a constantly running toilet. However, if these problems continue after replacing the flapper, you may need to hire a plumber to check and fix any bigger problems. 

The cost to install a new toilet typically runs from $225 to $530. This doesn’t include the price of the toilet itself, which can cost $90 to $1,500 depending on the model and features you choose. You can save money if you choose to install a toilet yourself. However, you might want to hire a pro for this project.

"Due to the many complexities of replacing a toilet flange, it is typically a job best left to the pros," says Jeff Botelho, Angi Expert Review Board member and plumber. "Many times it isn't as simple and straightforward as 'pop off the old one and pop on a new one' because the flange is either glued on (PVC/ABS), soldered on (brass/copper), or caulked in place with a lead & oakum joint (cast iron) and none of these things can be easily reversed without years of training and repetitive practice."

Toilets typically connect to your main vent stack, a vertical pipe that runs through all finished levels of your home and exits through the roof. It’s located behind the walls, but if you have an unfinished basement or a utility closet, you may find a portion of it running the vertical length of the space. Some basement toilets use an air admittance valve instead, which is a small vent located in the wall directly behind the toilet that extends upward a few feet from the drain.

Yes, frozen pipes can cause a toilet to stop working correctly. If the pipes are frozen, water cannot flow, which can lead to two main problems. First, the supply line to the toilet tank may be frozen, which prevents the tank from refilling with water after you flush. Second, the drain pipe itself can freeze, blocking water from flushing away. As a temporary solution for a non-refilling tank, you can manually add water, but this is not a long-term fix. To clear a frozen drain pipe, you can try pouring warm water into the toilet bowl or tank and then flushing, as the warm water may help thaw the ice blockage. Ultimately, the best course of action is to unfreeze the affected pipes to restore your toilet to full functionality.