Get matched with top fire pit installation pros in Marble Falls, TX

If a light switch is off, it’s very unlikely to cause a fire. For a fire to start, the switch has to be on, activating an electrical current, and the wiring must be faulty. However, the malfunctioning light switch could cause an intermittent current to move across the electrical wire. This issue could become a fire hazard with another device connected to the wire. You should replace the bad light switch as soon as you notice it or call an electrician.

Fire doors are constructed to have certain resistance levels regarding fire. A traditional door can typically resist fire for less than one minute, whereas fire doors can resist it for 30 to 120 minutes, depending on the fire door rating. Fire doors give you and your family a better chance of safely escaping during a fire than standard doors. 

There are several maintenance tips you should take to ensure your pellet stove's safety and proper maintenance. You should vacuum the ash pan every week to prevent overflowing and clean the stove and surrounding vents every three to four months. It’s also important to get a professional inspection every year and install a carbon monoxide detector close to your stove. Be sure to dispose of hot ashes in a closed metal container; store it outside, away from the house. Only use the pellets recommended by your stove's manufacturer, and follow any cleaning and maintenance instructions.

Start by checking the top or side edge of the door. Look for a certification label or metal tag stamped with details like the fire rating and information on the manufacturer. Even if it’s painted over, the tag should still be visible. Next, look along the edges for slim intumescent strips. They’re designed to swell up and seal gaps when exposed to heat. Finally, check if the door closes itself. Most fire doors have a self-closing mechanism, like an overhead closer or spring hinges. If none of these are obvious, contact a fire safety professional to help verify your door.