Top-rated structural engineers.

Get matched with top structural engineers in East Conemaugh, PA

There are 0 highly-rated local structural engineers.

Need a pro for your structural engineering project in East Conemaugh, PA?

Select your specific project to find the pro for you.

Find Structural engineers in East Conemaugh

Avatar for Groundworks

Groundworks

5 Industrial Road, Building A
4.52(
209
)
Approved Pro

Groundworks

5 Industrial Road, Building A
4.52(
209
)
Approved Pro
Super Service Award
Customers say: Super punctual
41 local quotes requested
13 years of experience

Since 2012, Groundworks has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs. Our top priority is providing high-quality home repair solutions and personalized service across Pittsburgh. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or crawl space. PA158514 (PA)

"We had our basement waterproofed by Baker's. It's been bone-dry since. We did have one piece of equipment fail within a month of the installation, but it was a third party dehumidifier that was just a dud I guess, no fault of Baker's. I texted the project manager about it on a Sunday. I expected a response the following week. He got back to me within the hour. The equipment was removed and replaced within a couple days. Everything great since. I would highly recommend Baker's, but specifically our project manager Nathan Goddard and the head guy on site Daylan. Can't remember his last name, but he's got a long beard and did a great job. Thanks to both of them and the rest of the guys."

David L on March 2025

Since 2012, Groundworks has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs. Our top priority is providing high-quality home repair solutions and personalized service across Pittsburgh. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or crawl space. PA158514 (PA)

"We had our basement waterproofed by Baker's. It's been bone-dry since. We did have one piece of equipment fail within a month of the installation, but it was a third party dehumidifier that was just a dud I guess, no fault of Baker's. I texted the project manager about it on a Sunday. I expected a response the following week. He got back to me within the hour. The equipment was removed and replaced within a couple days. Everything great since. I would highly recommend Baker's, but specifically our project manager Nathan Goddard and the head guy on site Daylan. Can't remember his last name, but he's got a long beard and did a great job. Thanks to both of them and the rest of the guys."

David L on March 2025


Avatar for NEC Solutions, LLC

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro
Customers say: Quick response
15 local quotes requested
10 years of experience

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025


Carl J. Massini, P.E.

Main Street
No reviews yet

Carl J. Massini, P.E.

Main Street
No reviews yet
36 years of experience

Residential structural engineering inspections to assess structure condition and damage concerns. Develop and/or review scopes of work for repair. Professional engineer with 32 years experience. Owner operated which allows for reasonable rates. Extensive mine subsidence damage investigation experience.

Residential structural engineering inspections to assess structure condition and damage concerns. Develop and/or review scopes of work for repair. Professional engineer with 32 years experience. Owner operated which allows for reasonable rates. Extensive mine subsidence damage investigation experience.


LLG Engineering Consulting LLC

114 Dauntless Dr
No reviews yet

LLG Engineering Consulting LLC

114 Dauntless Dr
No reviews yet
10 years of experience

We are a reputable Engineering Consulting firm specializing in Structural Design Analysis. Our residential and commercial building expertise includes CAD 3D-modeling and stamped (PE sealed) 2D-drawing for local building permits and contractor reference. We also perform post-home inspection structural design-analysis for homes on the market. we offer verbal opinions and written stamped-reports. Call us to discuss your design needs!

We are a reputable Engineering Consulting firm specializing in Structural Design Analysis. Our residential and commercial building expertise includes CAD 3D-modeling and stamped (PE sealed) 2D-drawing for local building permits and contractor reference. We also perform post-home inspection structural design-analysis for homes on the market. we offer verbal opinions and written stamped-reports. Call us to discuss your design needs!



Nelis Inspections, LLC

2608 Summit St
5.00(
8
)

Nelis Inspections, LLC

2608 Summit St
5.00(
8
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Providing Professional Engineering and Structural Inspection services to the Pittsburgh area. Proprietor is a PA registered Professional Engineer with over 15 years of experience.

"Tim is the consummate professional. He's very thorough in his inspection, and he writes clear reports with excellent pictures. His report on the termite damage was much better than that done by our original inspector. He explained everything he found so I felt like I had a good picture of what needed to be done. When he returned, my contractor was so impressed with him that he took his contact information to refer him to future customers who needed engineering reports."

Marian A on September 2018

Providing Professional Engineering and Structural Inspection services to the Pittsburgh area. Proprietor is a PA registered Professional Engineer with over 15 years of experience.

"Tim is the consummate professional. He's very thorough in his inspection, and he writes clear reports with excellent pictures. His report on the termite damage was much better than that done by our original inspector. He explained everything he found so I felt like I had a good picture of what needed to be done. When he returned, my contractor was so impressed with him that he took his contact information to refer him to future customers who needed engineering reports."

Marian A on September 2018


Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet

Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet
27 years of experience

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract Scope of Work (i.e. Increase in floor area or add an addition to an existing building renovation project) and requested prior to “Final Plans Issue” are provide on an “Engineering Change Order” basis at an additional “Engineering Fee”. CONSTRUCTION CHANGE – All “Plan Changes” requested after “Final Plans Issued” are provided on an “Engineering Change Order” basis at additional “Engineering Fee” plus a “Construction Change Order” is required if either the associated construction “Labor” was sub-contracted or “Materials” were purchased. CONSTRUCTION ERRORS (Failed Inspections) – All “Construction Errors” cited by either the “Municipality’s Inspection Authorities” or the “Engineer of Record” shall be corrected by the Sub-contractor at no cost ($0.00) to my Client. “PLANS FORMAT” – All Plans (Building Shell, Electrical, Floor Plans, Mechanical, Plumbing, Security System, Site, Sprinkler, and Structural) are provided in a format that enables either Jonathan or the Client to self-perform Construction Management (Bidding, Contracting, Change Order Management, and Inspection).

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract Scope of Work (i.e. Increase in floor area or add an addition to an existing building renovation project) and requested prior to “Final Plans Issue” are provide on an “Engineering Change Order” basis at an additional “Engineering Fee”. CONSTRUCTION CHANGE – All “Plan Changes” requested after “Final Plans Issued” are provided on an “Engineering Change Order” basis at additional “Engineering Fee” plus a “Construction Change Order” is required if either the associated construction “Labor” was sub-contracted or “Materials” were purchased. CONSTRUCTION ERRORS (Failed Inspections) – All “Construction Errors” cited by either the “Municipality’s Inspection Authorities” or the “Engineer of Record” shall be corrected by the Sub-contractor at no cost ($0.00) to my Client. “PLANS FORMAT” – All Plans (Building Shell, Electrical, Floor Plans, Mechanical, Plumbing, Security System, Site, Sprinkler, and Structural) are provided in a format that enables either Jonathan or the Client to self-perform Construction Management (Bidding, Contracting, Change Order Management, and Inspection).



RICK STEELE SURVEYING

11547 RAYSTOWN RD.
5.00(
1
)

RICK STEELE SURVEYING

11547 RAYSTOWN RD.
5.00(
1
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

SMALL LAND SURVEYING BUSINESS DOING PROPERTY SURVEYING, SUBDIVISION PLANNING, FLOOD ELEVATION CERTIFICATES, SEPTIC SYSTEM DESIGNS AND CONSTRUCTION SURVEYING

SMALL LAND SURVEYING BUSINESS DOING PROPERTY SURVEYING, SUBDIVISION PLANNING, FLOOD ELEVATION CERTIFICATES, SEPTIC SYSTEM DESIGNS AND CONSTRUCTION SURVEYING


kieffer construction

246 Hudsondale St
1.00(
1
)

kieffer construction

246 Hudsondale St
1.00(
1
)
36 years of experience

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.

Showing 1-10 of 15
Structural Engineering questions, answered by experts

It's safe to assume that all exterior walls are load-bearing, or at least have load-bearing characteristics. Some older homes feature porches or bump-outs that don't rest on the home's foundation. However, they still must carry the weight of the roof section they support. Walls containing floor-to-ceiling glass or other non-structural elements must use post and beam configurations to meet load-bearing criteria.

A structural engineer’s report includes a professional assessment of a property’s foundation condition, structural elements like roof trusses and floor joists, and the skeleton of the home, including studs, beams, and rafters. It will also usually include an assessment of drainage on the property and any potential issues that could arise from environmental conditions, like extreme weather in the area and even tree placement.

Indications include cracks in walls, uneven floors, and sticking doors or windows that suggest foundation movements.

In many areas, advice from a structural engineer or an architect will be required by your building department before you can remove a wall, but even if it’s not necessary, it’s a good idea. Accidentally removing a load-bearing wall—even if a general contractor advises that it’s safe—can cause major structural damage, putting you and your family at risk and potentially costing thousands or tens of thousands of dollars in property damage.

Structural engineers specialize in all aspects of a building’s structural integrity, including the foundation. Foundation engineering is a critical part of structural engineering, so structural engineers are experts in foundation design. Many foundation repair companies either have a structural engineer on staff or one they work closely with, so be sure you look for that when deciding who to hire for foundation repair.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The East Conemaugh, PA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.