A new steel I-beam is more durable than a wooden one. Learn what factors can affect steel I-beam installation costs and how to budget for this project.
How Much Does It Cost to Hire a Structural Engineer in Dallas? [2025 Data]
Normal Range: $378 - $519
Hiring a structural engineer in Dallas, TX costs around $444 on average, or between $378 and $519, depending on the exact services you need from a pro.
How we get this data
Photo: ReeldealHD images / Adobe Stock Photography
Photo: ReeldealHD images / Adobe Stock Photography
Cost Insights
Hiring a structural engineer in Dallas costs 1% to 5% of your project costs, or $125 to $150 per hour, depending on how their rates are structured.
Budget $350 to $900 for an engineer’s structural report in Dallas, based on your home’s size and your project’s scope.
Retaining a structural engineer to inspect your home for damage after a Dallas-area flood or tornado costs $350 to $1,000 or more.
Average structural engineer costs in Dallas range from $378 to $519, with most homeowners spending an average of $444. While Dallas’s cost of living is slightly above the national average, professional engineering costs here are comparable to those in other parts of the U.S.
Given Dallas’s tornado risk and the potential for storm damage, hiring a structural engineer is necessary in many situations. Dallas also has a growing population, which drives many new residential construction projects to keep up with housing demand, keeping the city’s structural engineers gainfully employed by local homeowners.
The main factors impacting Dallas homeowners’ structural engineer costs are project complexity, inspection type, and required drawings.
Structural Engineer Cost Factors
How much you’ll pay to hire a structural engineer in Dallas, Texas, depends on a variety of factors. Here’s a closer look at how your total breaks down.
Fee Structure
When hiring a structural engineer in Dallas, you will pay per project, per hour, or per square foot. If your engineer charges by the project, they may either charge a flat fee or a percentage of the entire renovation cost or the cost to build your house. The type of billing depends on the professional and the exact scope of work requested.
A structural engineer’s fee typically includes necessary manhours, on-site design consultation with an engineer or architect, evaluation of your property’s structural integrity, and a findings report. Their fee does not include trip charges, general contractor fees, permitting fees, or actual project costs such as materials, labor, or post-construction cleanup fees.
| Price Structure | Average Cost |
|---|---|
| Per project (fee) | $2,000–$8,500 |
| Per project (%) | 1%–5% |
| Per hour | $125–$150 |
| Per square foot | $1–$10 |
Project Complexity
The cost of a structural engineer will also vary based on the complexity of your project. If you’re just building an add-on to your existing home, your engineer will have minimal work to do to ensure the addition is safe.
If you’re instead altering your roof structure, replacing standard beams with more supportive steel I-beams to open up your space, or removing load-bearing walls, your engineer will have more work to do and will charge more accordingly. Custom new construction projects are the most involved work for a structural engineer and will typically be the most expensive. Costs can also increase if you’re hiring an engineer for complex projects, such as assessing your foundation or your home’s structural integrity after a tornado or other major Dallas storm.
Type of Inspection
When working with a structural engineer, an inspection is the first step—and may also be the only step, depending on why you’re hiring them. A structural engineer charges a flat fee for inspections, including checks during the sale of a home. The cost of a structural report averages $650, but prices can range from $350 to $900, depending on the size of your home and the complexity of your project.
Your structural engineer inspection cost will reach $1,500 or more if you’re having your professional investigate suspected foundation issues, including foundation cracks, bowing foundation walls, wavy rooflines, or sagging or squeaky floors.
Structural engineers in Dallas are often hired to assess a home’s structural integrity after major storms, when buying or selling a home, or before starting a major renovation. Structural damage inspections allow your engineer to recommend necessary structural repairs to restore your home’s safety.
These are the average costs associated with common types of structural engineering inspections.
| Type of Inspection | Average Cost |
|---|---|
| Beams/joists/trusses | $250–$1,000 |
| Buying or selling a home | $350–$900 |
| Foundation damage | $1,000–$1,800 |
| Home remodel | $350–$900 |
| Load-bearing walls | $150–$300 |
| New construction | $500–$2,000 |
| Storm damage | $350–$1,000+ |
Engineer Plans
Engineer plans are the drawings that detail your construction project, and in the case of new construction, they’re the plans that an architect and builder will work off of to construct your home safely.
The engineer plans themselves, and the process to produce them will cost you anywhere from $500 to $3,000, depending on the scope of the project. The cost can be much higher for more complex, large-scale projects, sometimes reaching 45% of the engineering budget.
It’s a good idea to budget an additional $300 to $700 for revisions in case you want to make changes after the first round of drafting. Additional revisions after that point will cost about the same amount.
Here are average prices for standard drawings that Dallas homeowners might request from a structural engineer.
| Drawing Type | Average Cost |
|---|---|
| Commercial construction | $5,000–$100,000 |
| Home add-on or bump-out | $1,000–$5,000 |
| Major home renovation | $2,000–$10,000 |
| New construction | $2,000–$10,000 |
| Outbuilding construction | $1,000–$5,000 |
Additional Structural Engineer Costs
Dallas homeowners should consider some additional costs associated with hiring a structural engineer. Here’s a look at some other expenses that can impact your project.
PE Stamp
In most cases, a professional engineer (PE) stamp is bundled into the total project cost, which includes drawings, designs, calculations, and permit-ready plans. However, if you have existing plans from an architect or designer and just need a PE stamp from a licensed structural engineer for obtaining project permits, expect to pay between $500 and $1,200 for them to review your plans.
How much you’ll pay depends on the level of review and calculations required, whether any revisions or updates are needed, your engineer’s rate, and your project’s complexity. The more involved the engineer needs to be, the higher the cost for their stamp.
Permits
You don’t need a permit to hire a structural engineer, but you’ll need one to carry out your construction plans after their work is complete. In the city of Dallas, permit fees are calculated based on the estimated valuation of your project and the type of permit you require.
Dallas has the following building permit fees:
Master permit: $100 minimum
Plan-review: Greater of $150 or $0.012 per square foot of building area
Site-plan review: Greater of $50 or $0.004 per square foot of building area
Technology fee: 4% of certain permit costs
As an example of how much you could pay, building a new home may have permit fees of $1,500, while a home addition’s permit fees might be around $1,000. If you’re obtaining permits for a commercial construction project, fees may reach several thousand dollars, depending on your scope.
Taxes
Sales tax in Dallas is 8.25%, but it’s important to note that this tax doesn’t apply to professional services, like hiring a structural engineer. However, if your engineer is providing their services as part of a remodel or repair project, you may be charged sales tax for that portion of your project. It’s wise to ask your structural engineer if they’ll invoice you strictly for professional services so that you can avoid surprises on your final bill.
Can a Structural Engineer Add Value to Your Home?
Hiring a structural engineer doesn’t have a specific return on investment (ROI) itself—instead, your returns will depend on the type of project you’re completing after they’ve completed their services. For example, if you hire a structural engineer in Dallas because you’re building a home addition, you may see an ROI of 20% to 50% on your project. If you’re hiring a structural engineer for a pre-purchase home inspection or for post-storm soil inspection, your ROI will be less significant.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
The homeowners guide to structural engineering services
From average costs to expert advice, get all the answers you need to get your job done.
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Do you have a load-bearing wall standing between you and your projects that you want to remove? Learn about the cost of removing a load-bearing wall.
Structural steel and wood beams ensure your house is structurally sound. Learn the difference between steel and wood beams and how to choose the right one.
The right ceiling joist spacing will help support your ceiling and prevent sagging, but there are a number of factors to consider. This guide can help.