Top-rated structural engineers.

Get matched with top structural engineers in Hooversville, PA

There are 0 highly-rated local structural engineers.

Need a pro for your structural engineering project in Hooversville, PA?

Select your specific project to find the pro for you.

Find Structural engineers in Hooversville

Avatar for Groundworks

Groundworks

5 Industrial Road, Building A
4.52(
209
)
Approved Pro

Groundworks

5 Industrial Road, Building A
4.52(
209
)
Approved Pro
Customers say: Super punctual
41 local quotes requested
13 years of experience

Since 2012, Groundworks has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs. Our top priority is providing high-quality home repair solutions and personalized service across Pittsburgh. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or crawl space. PA158514 (PA)

"We had our basement waterproofed by Baker's. It's been bone-dry since. We did have one piece of equipment fail within a month of the installation, but it was a third party dehumidifier that was just a dud I guess, no fault of Baker's. I texted the project manager about it on a Sunday. I expected a response the following week. He got back to me within the hour. The equipment was removed and replaced within a couple days. Everything great since. I would highly recommend Baker's, but specifically our project manager Nathan Goddard and the head guy on site Daylan. Can't remember his last name, but he's got a long beard and did a great job. Thanks to both of them and the rest of the guys."

David L on March 2025

Since 2012, Groundworks has specialized in helping homeowners with their foundation repair, waterproofing, and concrete needs. Our top priority is providing high-quality home repair solutions and personalized service across Pittsburgh. With fully trained technicians, industry-leading products, and nationally backed warranties, Groundworks is here to restore your basement, foundation, or crawl space. PA158514 (PA)

"We had our basement waterproofed by Baker's. It's been bone-dry since. We did have one piece of equipment fail within a month of the installation, but it was a third party dehumidifier that was just a dud I guess, no fault of Baker's. I texted the project manager about it on a Sunday. I expected a response the following week. He got back to me within the hour. The equipment was removed and replaced within a couple days. Everything great since. I would highly recommend Baker's, but specifically our project manager Nathan Goddard and the head guy on site Daylan. Can't remember his last name, but he's got a long beard and did a great job. Thanks to both of them and the rest of the guys."

David L on March 2025


Avatar for NEC Solutions, LLC

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro
Customers say: Quick response
16 local quotes requested
10 years of experience

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025


Mash Engineering

509 15th Street
No reviews yet

Mash Engineering

509 15th Street
No reviews yet
3 years of experience

Mash Engineering provides civil engineering and land surveying services. We provide services to both residential and commercial clients. Example projects include boundary surveys, house additions, site planning/permits for new construction, subdivisions, land mergers, and structural inspections. No project is too large or small. Please contact us to discuss your project. www.mashengr.com

Mash Engineering provides civil engineering and land surveying services. We provide services to both residential and commercial clients. Example projects include boundary surveys, house additions, site planning/permits for new construction, subdivisions, land mergers, and structural inspections. No project is too large or small. Please contact us to discuss your project. www.mashengr.com


Carl J. Massini, P.E.

Main Street
No reviews yet

Carl J. Massini, P.E.

Main Street
No reviews yet
36 years of experience

Residential structural engineering inspections to assess structure condition and damage concerns. Develop and/or review scopes of work for repair. Professional engineer with 32 years experience. Owner operated which allows for reasonable rates. Extensive mine subsidence damage investigation experience.

Residential structural engineering inspections to assess structure condition and damage concerns. Develop and/or review scopes of work for repair. Professional engineer with 32 years experience. Owner operated which allows for reasonable rates. Extensive mine subsidence damage investigation experience.



Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet

Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet
27 years of experience

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract S



RICK STEELE SURVEYING

11547 RAYSTOWN RD.
5.00(
1
)

RICK STEELE SURVEYING

11547 RAYSTOWN RD.
5.00(
1
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

SMALL LAND SURVEYING BUSINESS DOING PROPERTY SURVEYING, SUBDIVISION PLANNING, FLOOD ELEVATION CERTIFICATES, SEPTIC SYSTEM DESIGNS AND CONSTRUCTION SURVEYING

SMALL LAND SURVEYING BUSINESS DOING PROPERTY SURVEYING, SUBDIVISION PLANNING, FLOOD ELEVATION CERTIFICATES, SEPTIC SYSTEM DESIGNS AND CONSTRUCTION SURVEYING


kieffer construction

246 Hudsondale St
1.00(
1
)

kieffer construction

246 Hudsondale St
1.00(
1
)
36 years of experience

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.


Metal Supermarkets

7120 Golden Ring Road
No reviews yet

Metal Supermarkets

7120 Golden Ring Road
No reviews yet
14 years of experience

Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including:  No minimum order  Over 8,000 metal products, shapes and grades  Unsurpassed Service!  Cut to size  Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.

Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including:  No minimum order  Over 8,000 metal products, shapes and grades  Unsurpassed Service!  Cut to size  Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.

Showing 1-10 of 14
Structural Engineering questions, answered by experts

It’s possible to drill into an LVL beam, but you should always avoid it. LVL beams are major structural components of your home, and drilling into them can weaken them and lead to cracking over time. If you need to drill into an LVL beam, consult a structural engineer. They’ll know the bit size, depth, and directionality that’s safe to use when drilling.

Proper licensing and experience in residential and commercial structural projects.

You should pick steel for your new support beam for a few reasons. While steel is more expensive than other materials, such as laminated veneer lumber or glulam, it offers the following benefits:

  • Fire-resistant

  • Unaffected by pests

  • Longer-lasting

  • Stronger against water damage (when galvanized against rust)

Yes. Foundation walls are always load-bearing.

Cathedral ceilings make a statement in your home, but at the cost of your attic space. Normal attics are wide open, which allows warm air to move around and exit your home. Because of this, cathedral ceilings make your home less energy efficient and put your ceiling at risk of venting issues if you’re not careful. They also reduce your attic storage space, potentially cause an echo, and even make it harder to change a light bulb.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Hooversville, PA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.