Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Brookhaven, PA

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Brookhaven, PA?

Select your specific project to find the pro for you.

TRUSTED BY BROOKHAVEN, PA HOMEOWNERS

  • Average homeowner rating star icon4.6
    Average homeowner rating
  • Verified reviews icon172
    Verified drywall insulation services reviews

Find Drywall insulation pros in Brookhaven

Avatar for Alligood Energy
Alligood Energy
4.9(
105
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Brookhaven, PA and surrounding areas

Approved

In business since 2012

Credit card accepted

Customers say: Quick response

"It went very well. Jon arrived on time and spent a good bit of time looking all around the basement and attic, even performing a home leak test which revealed that our chimney's damper doesn't perform as it should (already called for service) and that the insulation in our attic is up to code. He made useful suggestions about potential upgrades to our HVAC and water heater, as well as our thermostat. He installed energy efficient light bulbs in the few lamps where we didn't already have them. All told: a very useful expenditure of time and limited funds (the state of DE covering 3/4s of the cost!"
Insulation Project
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+6

Response time2 days
Response rate100%
7 neighbors recently requested a quote
Avatar for USA Insulation of Philadelphia
USA Insulation of Philadelphia
3.9(
88
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Brookhaven, PA and surrounding areas

Approved

Super Service Award Winner

In business since 2012

Free estimates

Credit card accepted

"We hired USA Insulation to blow insulation into the ceiling above our garage. Their customer service team was very responsive, had great communication regarding visits, and provided a quote onsite after viewing the job. The job was completed as promised and all the workers were professional and courteous. I also liked the insulating material they used which did not give off fumes like some foam insulation, and was not itchy like fiberglass insulation."
Response time2 days
Response rate97%
106 neighbors recently requested a quote
Avatar for Atticrawl, LLC
Atticrawl, LLC
4.7(
18
)
Blown-In Insulation - Install or Upgrade

Serving Brookhaven, PA and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

Welcome to Atticrawl, LLC \nWe pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

Attic Insulation
Attic Insulation
61 neighbors recently requested a quote
Recommended by62%of homeowners
Doyle Drywall Co
4.7(
137
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Brookhaven, PA and surrounding areas

In business since 1995

Free estimates

"We had a cracked ceiling and sagging ceilings in 3 rooms, and a portion of drywall hanging but off the nails, larry and his son, replaced the broken pieces and shored up the rest with drywall nails, and insulation, and in some cases new drywall. A dirty, difficult job, which had to be done two days in a row as it required furniture moved and painters to follow. He recommended a painter for us as well, which allowed us to set the whole thing up for one week of inconvenience, but got the job done. He and his son were pleasant as well which helped through this trying experience. Since this problem is uniform through our development we had seen where ceilings had caved in on others and were caving in slowly on the rest and wanted this done before anything fell down on us and hurt us or guest. Larry cut out two days to do 3 rooms, which allowed us to set the painter up for completion. We also had to bring in a electrician to shore up a ceiling fan now that the ceilings were set properly."
Recommended by95%of homeowners
Avatar for USA Insulation of Philadelphia
USA Insulation of Philadelphia
4.3(
49
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Brookhaven, PA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"

Our primary bedroom is above the garage and even though we have a newer home, you can feel cold air coming thru the floor.  It's the coldest room in the house by far.  Ed's team came in and placed foam insulation in the garage ceiling.  He gave us $100 off for Angies list discount which was nice.  They cleaned up well when done.  Now that it's warm out I can't grade the quality of the work until winter again because I won't know till then if its helping with the problem.  I will come back and update then.  We had been quoted over $6000 by another company to do the work so hopefully this works and comes in far cheaper.


"
Recommended by92%of homeowners
...
Showing 1-10 of 74
Drywall Insulation questions, answered by experts

The best tool for skim coating drywall is a skim coating blade, which can smooth out joint compound in wide stretches. While you could use a smaller drywall knife for skim coating, the smaller size means it’ll take longer to smooth out each section. Instead, consider investing in a skim coating blade for the quickest application.

The easiest way to tell if a wall is load bearing is to check if it’s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don’t fit into these categories can still be load-bearing. If you’re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.

If your home was built before the 1940s and was not remodeled in the past 50 or so years, you probably have plaster walls. Aside from assuming, there are some practical ways to tell if you have plaster walls, including the following: If you knock on the wall and it feels solid, not hollow, if you can’t insert a thumbtack easily, if there are cracks that look like spiderwebs, or if your home has curved, arched, or swirled walls, doorways, or window openings.

If you have an unfinished basement or attic, you could examine the backs of any finished walls to check, too.

If you already have plaster walls and ceilings, adding new plaster costs $2 to $10 per square foot. For an average-sized room, that would come out to $1,200 to $10,000. However, the cost to replace plaster with drywall is higher—running between $720 and $1,250 for a 10-by-8-foot wall or ceiling (not including drywall finishing).

While fumigation chemicals cannot pass through solid objects, they will seep into any openings in walls, doors, or other closed spaces. This allows them to get into tight places where pests may be hiding and causing damage, like termites ruining the foundation of your home. It also means that your home needs to ventilate for 48 hours before returning to ensure that no harmful chemicals remain in your space. 

The Brookhaven, PA homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.