Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Morton, PA

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Morton, PA?

Select your specific project to find the pro for you.

TRUSTED BY MORTON, PA HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon222
    Verified drywall insulation services reviews

Find Drywall insulation pros in Morton

Avatar for G.E.G. Enterprises, LLC
G.E.G. Enterprises, LLC
4.4(
205
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Morton, PA and surrounding areas

Approved

Super Service Award Winner

In business since 1999

Free estimates

Credit card accepted

"G.E.G. did a great job installing blow in insulaltion in my attic. They were quick and prepared. My only wish is they would have been able to pull up more of the unused attic flooring and gotten more insulation under it, though they were able to increase insulation in other areas."
Blown-In Attic Insulation
Response time1 day
49 neighbors recently requested a quote
Recommended by93%of homeowners
Avatar for E S G, Inc.
E S G, Inc.
4.7(
126
)
Blown-In Insulation - Install or Upgrade

Serving Morton, PA and surrounding areas

Approved

In business since 1981

Free estimates

Credit card accepted

"I had a problem room that had little insulation. Cold in the winter. Hot in the summer. No attic access. Energy services group was able to drill large holes in the ceiling & outside wall and spray in insulation. Then plug the holes and spackle. Replaced canister lights with led ones. They explained to my wife what they were going to do before it happened. Then said what they actually were able to accomplish. Great communication. Quick to schedule. Cleaned up after themselves. A quality company"
Freshly blown insulation with Baffles installed
Insulated foundation walls
Replacing damaged duct with new insulated duct
Newly installed crawl space access door
Insulated air tight pull down stair cover

+4

Response time12 hrs
Response rate95%
Recommended by97%of homeowners
Avatar for Alligood Energy
Alligood Energy
4.9(
105
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Morton, PA and surrounding areas

Approved

In business since 2012

Credit card accepted

Customers say: Quick response

"It went very well. Jon arrived on time and spent a good bit of time looking all around the basement and attic, even performing a home leak test which revealed that our chimney's damper doesn't perform as it should (already called for service) and that the insulation in our attic is up to code. He made useful suggestions about potential upgrades to our HVAC and water heater, as well as our thermostat. He installed energy efficient light bulbs in the few lamps where we didn't already have them. All told: a very useful expenditure of time and limited funds (the state of DE covering 3/4s of the cost!"
Insulation Project
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+6

Response time2 days
Response rate100%
9 neighbors recently requested a quote
Avatar for RetroFoam of Philadelphia
RetroFoam of Philadelphia
5.0(
22
)
Injection Insulation - Install

Serving Morton, PA and surrounding areas

Approved (Corporate)

In business since 2023

Free estimates

Warranties offered

"We are extremely satisfied with the whole process of our house being insulated. First we had the walls done, and then a couple weeks later we had our attic insulated. The crew were so nice, friendly, and knowledgeable. We are very satisfied with everything. Thank you, everyone."
RetroFoam Wall Insulation
Installing RetroFoam
RetroFoam with Siding
RetroFoam with Brick
Response time1 day
Response rate100%
115 neighbors recently requested a quote
Avatar for USA Insulation of Philadelphia
USA Insulation of Philadelphia
3.9(
88
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Morton, PA and surrounding areas

Approved

Super Service Award Winner

In business since 2012

Free estimates

Credit card accepted

"Had our 100 year old home insulated. It has made the biggest difference. Price was a bit higher than other companies we had quotes from.The main reason we chose USA is because they did everything from the outside by taking off pieces of my siding. So happy!"
Response time2 days
Response rate97%
108 neighbors recently requested a quote
Avatar for Atticrawl, LLC
Atticrawl, LLC
4.7(
18
)
Blown-In Insulation - Install or Upgrade

Serving Morton, PA and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

Welcome to Atticrawl, LLC \nWe pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

Attic Insulation
Attic Insulation
61 neighbors recently requested a quote
Recommended by62%of homeowners
Doyle Drywall Co
4.7(
137
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Morton, PA and surrounding areas

In business since 1995

Free estimates

"We had a cracked ceiling and sagging ceilings in 3 rooms, and a portion of drywall hanging but off the nails, larry and his son, replaced the broken pieces and shored up the rest with drywall nails, and insulation, and in some cases new drywall. A dirty, difficult job, which had to be done two days in a row as it required furniture moved and painters to follow. He recommended a painter for us as well, which allowed us to set the whole thing up for one week of inconvenience, but got the job done. He and his son were pleasant as well which helped through this trying experience. Since this problem is uniform through our development we had seen where ceilings had caved in on others and were caving in slowly on the rest and wanted this done before anything fell down on us and hurt us or guest. Larry cut out two days to do 3 rooms, which allowed us to set the painter up for completion. We also had to bring in a electrician to shore up a ceiling fan now that the ceilings were set properly."
Recommended by95%of homeowners
Avatar for USA Insulation of Philadelphia
USA Insulation of Philadelphia
4.3(
49
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Morton, PA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"In the attic, we had wooden slats that covered the floor so they had to go under the floorboards. Although we were told by the salesman that there would always be a person on the other side of the wall to check for problems, the second guy was not watching and they blew a hole in the ceiling of the bedroom ( see pictures). They assured us that they would fix the hole, spackle it and repaint the ceiling. They did spackle the hole but only painted the area that they fixed - not the whole ceiling. And they did a lousy spackling job. We had to get someone else to smooth out the spackle and repaint the ceiling. We could have pushed to get them to fix the ceiling but it was late on the last day and we wanted the job done. As for the gel on the outside, the truck broke down due to the heat of the day and it took 3 days to finish the rest of the job including fixing the ceiling and the inside walls. Although the salesperson, did a first investigation of the house and said it could all be done from the outside, the workers found that one bedroom was covered in concrete so they had to drill from the inside of one of the bedrooms leaving many holes to be spackled. This time it was not so bad and we were able to sand and repaint that bedroom. But the workers could have done a better job of cleanup of the sparkle. It was all over the baseboard and the rug and we had to use rags to clean it up. We realize that things happen. And maybe we were too hopeful based on the salesman's pitch. But we would rather have had the salesperson tell us the truth about the possibility of drilling holes in the inside of the house even though he did a thorough inspection. All in all, we are hoping that insulating our house will save us a lot of money in heating costs. The manager was very accommodating, we saved some money by paying with a check vs a credit card. The workers were very nice and the lead person was very knowledgeable. Any renovation is stressful. We would probably recommend them because now we know what to expect. This company was recommended to us by a number of people. We have no doubt that the product itself is excellent. For that reason, we expected it all to go smoothly. It did not. Everything that could go wrong, basically did. It all got fixed but ... We did not plan for a hole in the ceiling, the truck breaking down and go into the shop to fix the problem with the gel overheating and not coming out of the hose fast enough, the concrete in one of the bedrooms that meant that all the holes had to be drilled on the inside of the bedroom and we had to repaint. So for those reasons, we are giving them a rating of fair. We hope your experience will be a lot better than ours !!"
Recommended by92%of homeowners
...
Showing 1-10 of 82
Drywall Insulation questions, answered by experts

Yes, it is possible to rewire a house without removing the drywall, but this doesn’t work in all homes. You can pull out old wires and insert new ones if you have access to the wiring system via the ceiling or through a crawl space. Some pros can also use a magnetic kit to fish the old wire out of the wall through a hole cavity and install the new wires. Just keep in mind that doing this is less stable than removing drywall, as you won’t be able to staple the wires into the framing.

A 50-pound mirror can be hung on drywall, but only if it has the support of strong hardware. Ideally, you can find the studs behind the drywall and attach the mirror to them; this will give your mirror better stability. Otherwise, confirm that you are using anchors appropriate to the weight of the mirrors. Another technique is to use French cleats—two pieces of wood that fit together, with one piece attached to the wall and the other to the mirror. This allows the weight to be distributed over a wider area.

While a normal moisture level for drywall is between 5% and 12%, replacement is recommended if you get consistent readings above 17%. At this level, the drywall is likely too compromised by extensive moisture damage to be considered safe. You can replace either the entire sheet or just the affected section. If you are unsure after a visual inspection, it is best to have a contractor or water restoration provider use a professional moisture meter to get an accurate reading.

Yes, drywall can hold a 50-pound TV. However, when mounting a TV, you’ll either need to attach it to wall studs or use drywall anchors. If you use anchors, make sure to buy a type that can hold at least 50 pounds. Molly bolts, threaded anchors, and toggle bolts are all good options. For extra support, you can also install a wall mounting plate with the anchors.

You should wait at least 24 hours for drywall mud to dry before sanding or applying another coat. However, the exact drying time depends on several factors, including the thickness of the application, room temperature, humidity, and the type of compound used. Thicker layers, or projects in high humidity, may require 48 hours or more. Lightweight compounds tend to dry faster than heavier, all-purpose ones. You'll know the mud is ready when it feels completely dry and firm to the touch and has changed to a consistent light color. Sanding too early can cause smudging or gouges, so patience is essential for a smooth finish.

The Morton, PA homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.