Get matched with top backsplash installation pros in Wilsonville, OR

You can attach tiles to a wall using thin-set mortar. You’ll also need a notched trowel to create grooves within the adhesive so it flattens completely when pressed in and securely holds the wall tiles. Finally, you’ll need grout to smooth the gaps between the tiles and, ideally, a grout sealer to prevent mold. While it sounds simple enough, proper planning and execution are crucial, so carefully review the steps in this guide or hire a pro tile installer to complete this project.

You should always use caulk instead of grout where the tile meets the wall. This will help your tile installation look great and last a long time. When you accidentally use grout for the corner seams, you end up making the tiles too rigid. So as the wall shifts over time, your tiles have no wiggle room. This can lead to tile damage, which will eventually require you to do at least a partial reinstallation.

Yes, unfortunately, it is normal for wall and floor tiles to crack, especially when you drop heavy items on tiled floors or place heavy objects on them. Tiles are also more susceptible to cracking when ceramic tiles designed for walls are installed on floors, as these are often not strong enough to handle heavy loads from foot traffic and furniture. Similarly, tiles that are installed incorrectly, lack adequate subflooring, or have other installation problems are prone to cracking. To avoid these problems and the inevitable repair and replacement costs they bring, always hire a professional for tile work and follow best practices for installation.

No, when done correctly, removing the tile shouldn’t damage the subfloor. However, if there was pre-existing damage to the subfloor from standard use or lack of maintenance, the subfloor may need repairs. For example, if the contractors notice mold growth on the subfloor or an uneven surface, you may need more extensive services before installing new tile.

If you DIY tile removal, remove the tiles one step at a time, individually removing the tile, grout, and mortar to prevent unnecessarily damaging the subfloor. Depending on the age of your home, consider having a professional inspect the subfloor to ensure it’s in good enough condition to lay new tile.