Get matched with top masons in Mount Vernon, OR

Cobblestone can be made from many different types of stones but the most common ones, by far, are granite, basalt, limestone, and sandstone.  If you are laying a brick paver patio or other such project, the medium is different. It’s rare, but cobblestone can also be made from marble, slate, jasper, and other types of rock. Technically, you can make cobblestone from almost any type of rock, but if it is weather-resistant and stands the test of time is another question entirely.

Drilling into brick or mortar requires the use of a masonry drill bit. Masonry drill bits appear similar to standard drill bits except for the leading tip of the bit. The tip has a bulky carbide arrow-shaped end slightly larger than the rest of the bit shaft. Standard or high-speed drill bits designed for making holes in wood or metal don’t have the ruggedness or design shape you need to drill into brick. They may not go through the brick at all, and if they do, they’re more likely to overheat, crack, or dull before you finish drilling.

For most brick cleaning jobs, including fireplace bricks, use a masonry sponge and a gentle cleaner. A simple solution of equal parts water and vinegar, or a few drops of dish soap in a bowl of water, can effectively remove grime. For tougher stains, you can use a dedicated masonry or fireplace cleaner. It is crucial to wet the bricks thoroughly with water before applying any cleaning solution to prevent the brick from absorbing it, and to rinse the surface completely afterward. Harsher cleaners containing bleach or ammonia should only be used as a last resort, and they should never be mixed together.

The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you’re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.