Get matched with top fire pit installation pros in Broken Arrow, OK

Your smoke detector might be too high in some homes or circumstances to reach yourself. If you feel unsafe getting on a ladder to replace your hardwired smoke detector, call a licensed electrician or local handyman to knock this project off your to-do list. If you have a battery-operated smoke detector, your local fire department can change the batteries or help you replace the detector—just make sure you call the non-emergency number.

In any case, do not let this project go unresolved, as it could turn into a huge safety issue.

No. Removing the cause of concern will only lead to deeper concern. You cannot use any fire-powered appliance like a fireplace or furnace without an escape route for the smoke and fumes. If you remove the flue intending to repair or replace it, you should only use the fireplace, wood stove, or furnace once the flue is in working order. If you cannot replace the flue you have removed, call a chimney repair professional immediately.

You can fireproof an existing door to some extent, but it's better to remove the old door and replace it with a fire-rated model. Anything dealing with extreme heat needs rigorous testing and a door you DIY fireproof will not undergo the same safety measures as a premade one. Consider a door with a rating of at least 30 minutes or more in residential areas.

A chimney requires both a cover and a cap, but these parts often get confused with one another. A chimney cover seals the top of the chimney around the flue pipe to prevent water from entering the chimney. A chimney cap is a piece that sits above the flue to prevent animals, debris, and water from entering the flue.