Get matched with top gas fireplace repair pros in Yorkville, OH

No, you can't apply limewash with a roller and expect good results. Limewash is as much a technique as it is a type of paint, and a freehand application with a brush is part of that technique. Hand brushing a large area can be tiring, but limewash goes on easily and only requires thin coats to be effective.

Knowing who to hire to install your fireplace is important when it comes to having a safe place to burn a fire in your home. The best person to contact for installing fireplaces is a mason or general contractor who has a National Fireplace Institute (NFI) specialist certification. If you’re installing wood paneling, then it’s a good idea to also find a pro who is Wood Energy Technology Transfer (WETT)-certified. 

Both of these certifications show that your pro is well-equipped to install fireplaces and inspect your home for the utmost safety.

If you’re deciding between limewash versus whitewash, know that both have a chalky matte appearance. Limewash is made from lime, water, and sometimes pigment, while whitewash consists of lime, water, white chalk, and binders (though you can get a similar look with watered-down white paint). Whitewash has fewer options for color customization, and it sits on surfaces instead of being absorbed into them, which can trap moisture. Whitewashing costs less—about $1.40 to $4.20 per square foot.

If you want to avoid damaging your home's brick, you should always use a stain specifically formulated for masonry projects. These stains are designed to penetrate the porous surface of the brick and bond with it, unlike paints, which sit on the surface and are prone to peeling and flaking. Look for stains labeled for use on brick or other masonry surfaces. Avoid using regular paint on brick, as it will not adhere well and will likely lead to future maintenance issues.