"John is a true professional and will make sure the job is done right. He is also courteous and polite as well as being thoroughly knowledgeable. If I ever have an electrical problem in the future I will be calling DiFonzo Electric."
"I estimate I have just under $100k in electronics and appliances in my house. We have significant lightning storms in my location. To NOT have lightning suppression installed is significant risk in my mind based on my location in New Jersey. RS LIGHTNING PROTECTION was responsive with a quick cost estimate and a reasonable price based on my research for installation. By the way...installation is part art, such as bends in cable are not more than 90 degrees. It's not just about running grounded cables. This installation in conjunction with surge protection on my electrical panel performed by my electrician and cable protection gives me significant piece of mind that all my appliances and electronics are protected from lightning and any potential surge generated by a near strike. Mr Richard Sherlock knows his subject. Highly recommended. Five stars."
"I was pleased with the installation of the lightning rods--communication was great and the work was done quickly. What I wasn't happy with is he quoted me a price that was less then my actual bill was BUT the price was still less then two other contractors bids."
"The install was scheduled and completed quickly. The lightning rods and cable look neat and tidy along the roof. Mr. Hamilton was friendly and efficient."
"WB Lightning is focused on customer service. The company provided good communication and responded very quickly to my inquiry for a quote. WB Lightning is a respected company, I had another electrical service provider tell me I made a good choice when I hired WB Lightning Rods."
"Edison Landscape & Deck Lighting is THE company to do work at your home. From the helpful and kind office ladies, to the designer who came out to give us our estimate, to the installation crew — we received A+ service from start to finish. Everyone was professional, friendly, and a pleasure to work with. We couldn’t be happier with the result and highly recommend Edison Landscape & Deck Lighting!"
We pride ourselves on our extreme professionalism and attention to detail. Our customer satisfaction guarantee will assure you we will not leave your property until you are completely satisfied with our work. As a locally owned and operated business you can trust that we will treat your home as we would treat our own. Give us a call today, and we look forward to working with you!
We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business
Your go-to electrician for dependable repairs, lighting, and home electrical upgrades.Graduated from Parkway West, familiar with code and safety standards. OHSA 10 Certified.
An outlet can trip because the circuit it’s on is overloaded, meaning the devices plugged into it are drawing more power than the circuit can safely carry. Another culprit could be because a power surge from a storm or accident caused a problem with your local electrical grid or there’s a short or a fault causing power to run through the circuit in a dangerous or unplanned way.
If your plug feels hot to the touch, it’s likely a sign of an electrical issue that needs immediate attention. Check for signs of melting or discoloration around the plug, as well as any burning smells or smoke. If you notice any of these signs, immediately unplug any devices and do not use the outlet again until it’s been inspected by a qualified electrician.
Electrical fixes are best handled by a licensed electrician, but it’s possible to release a wire connection on your own. Be sure to always turn off the power to the outlet at the circuit breaker before beginning your project to avoid electric shock. Carefully insert the tip of a flat screwdriver into the rectangular hole beneath the wire. Hold the outlet in the palm of your other hand. Pull out the wire as you apply pressure with the screwdriver.
To install an outlet from existing wiring, you’ll need to choose a location where you can already access existing wiring. The easiest way to do this is to install an outlet on the other side of the wall of an existing outlet.
Since the wiring is already in place, all you have to do is connect a new cable to the existing wiring and then connect the correct wires through the wall—to the new electrical outlet. Place your new outlet into the opening in the wall and then connect the correct wires to the appropriate terminal screws.
If you’re someone who likes to tinker around the house and make DIY repairs, a multimeter or voltmeter can be a great tool to have around, especially if you’re comfortable with electrical repairs. That said, if working with electricity feels out of your depth, you don’t need to invest in a multimeter. Reach out to an electrical pro for any electrical work you need done if any part of you is hesitant about a project.
The Yorkville, OH homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Whether you’re shopping for a new home or simply doing a safety check on your current place, learn what factors influence an electrical inspection cost.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.