Best drain cleaners near Willoughby, OH

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

You should not attempt to snake your sewer yourself. Accessing and snaking your sewer requires heavy-duty equipment, and while renting is possible, misusing it can damage your sewer main and leave you with very expensive repair costs, not to mention potential environmental issues and severe water damage. Accessing your sewer also exposes you to hazardous sewer gasses, and failing to seal the sewer properly after work can be very dangerous. It’s always best to hire a professional sewer cleaner near you to handle this type of work.

If the drain is frozen, the pipes connecting to the washing machine are likely frozen. If the hot water trick doesn’t also unfreeze the washing machine pipes, you can gently apply heat with a hair dryer on the lowest setting. Start at the end of the pipe closest to the faucet to prevent pressure from building in the pipes, and make sure the faucet is open to drain the water as it melts.

It is generally not recommended to pour hot or boiling water down a drain to unfreeze pipes due to significant risks. In some cases, the sudden temperature change can cause more ice buildup or produce steam, which increases pressure and could cause the pipe to burst, leading to costly damage and potential burn injuries. While hot water might help with a partially frozen drainpipe, it is unlikely to thaw a completely blocked water pipe further down the system. Additionally, boiling water can damage plastic pipes over time. Safer and more effective methods include using a space heater near the frozen section or applying hot towels directly to the pipe.