Get matched with top fencing pros in Olmsted Falls, OH

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

The most affordable metal fence type is wire at just $3 to $5 per linear foot. Wire fences come in a variety of styles and do a good job of marking perimeters and keeping animals in or out of certain areas. While they’re very easy to install and repair, many homeowners find them unattractive, and many homeowners associations won’t allow them.

Most privacy fences are easy to install if you’re going with a DIY-friendly option like a wood fence, vinyl fence, or pallet fence. Since pallet fences come in the form of pre-constructed fence panels, they’re often considered the easiest privacy fence to install. Just get your fence stakes in the ground and slide the pallets onto them before securing them with scrapboard.