Get matched with top fence painters in Continental Divide, NM

Regular staining, sealing, and inspecting for rot or insect damage prolongs fence lifespan.

Wood stain is typically dry to the touch within 6 to 12 hours, but it is not fully cured at this point. You should wait at least 24 hours before applying a second coat or a protective finish. For surfaces like decks, avoid walking on them for at least 24 to 48 hours, and wait even longer before placing furniture. The full curing process can take from 24 hours to one week, depending on the type of stain. Factors like high humidity and cold temperatures can extend drying and curing times, so it's wise to allow for extra time in these conditions.

Wood stain is not flammable after it dries. The solvent in wood stain is what causes the liquid form to be highly flammable, but the stain drying process involves the solvents dissolving, which leaves behind a non-flammable product on your wood project. Wood stain is, however, flammable before you apply it, so you should always store partially full cans and used wood stain rags away from sources of heat and open flames.

Maintaining a composite fence is pretty straightforward, as it doesn’t require staining or repainting. To keep it clean, scrub the fencing with a composite deck cleaner or hot, soapy water. Use a soft-bristle brush for the best results, and avoid using pressure washers or sanders. Plan to clean your fence at least twice a year. Scrubbing the fencing in the fall and spring can help prevent mold and mildew growth.