Get matched with top plaster repair specialists in Alamogordo, NM

Although their applications are very similar, no drywall compound and spackle are not the same thing. Spackle is a bit thicker and is used to patch holes as it dries quickly and is easy to sand. Joint compound shrinks a bit more and can be more temperamental to spread. However, one benefit is that you can use joint compound as spackle (for small jobs), but you can’t use spackle as joint compound.  

Smaller is better when patching holes with spackle. Any holes wider than four to six inches in diameter tend to be too wide to repair with spackle alone. You'll likely want to patch bigger holes with a drywall panel. 

Even holes measuring up to 6 inches may be challenging to fill with spackle alone. For best results, purchase a wall repair patch made from wire mesh. Cut the patch to fit over the hole, then use the spackle to hold it in place. Apply the spackle over the patch as you would for a smaller hole.

Plaster is a pretty tough surface, but it can still sustain damage from things like bumping against it, water issues, dampness, extreme humidity changes, and plain old age. Most plaster walls last hundreds of years and will only be taken down to the base layer when major repairs are required. Being cautious around the wall, not placing furniture against it, and ensuring stable humidity are all great ways to reduce possible damage.

It is possible to repair plaster walls yourself, but it’s not always a good idea. Hiring a professional means you’ll have expert eyes on the damage looking to see if there is an underlying issue or if the cracks are just from normal expansion and contraction. Additionally, a professional’s plaster repair will very likely last longer than a DIY job, which means you could end up saving money over time by going with a pro from the start.