Get matched with top fencing pros in Pine Beach, NJ

Who pays for a new fence between neighbors depends on its location relative to the property line. If you build the fence entirely on your property, you are solely responsible for the costs of installation, maintenance, and repair. If the fence is built directly on the property line, both neighbors are typically responsible for the costs. In this case, it is essential to consult with your neighbor beforehand to agree on a plan for payment. While you should always inform your neighbor of your plans in advance, you generally cannot force them to contribute financially unless there are specific local laws, such as in California, where both parties might be responsible for costs unless a different agreement exists. It's a good idea to get a property line survey to know the exact boundaries before building.

Fabricating an aluminum fence costs about $4,350 on average, ranging from about $2,450 to $6,500. Your fencing costs can run as low as $750 or as high as $11,000 or more, depending on the fence's size, complexity, and geographic location. You should consider additional cost factors including the thickness of the aluminum, height of the fence, necessary permits, and custom colors.

When your rolls of silt fence join together, you’ll want to overlap them to make sure they’re still as effective at keeping water out without requiring fastening together. Overlap two sections of the silt fencing so that two sheets of fabric cover the span of two posts. If you want to fasten them together, you can staple them or use a zip tie, depending on whether your posts are metal or wood. 

Yes, you can use a floor jack to remove fence posts. Attach a stem to the base of the fence post so you can position the floor jack underneath. The stem can be a scrap piece of wood attached with nails or a sturdy nail itself. Put the jack beneath the stem and push the lever to lift up on the fence post and remove it from the ground.