Get matched with top flooring contractors in Hammonton, NJ

Tile—specifically smaller, mosaic-style tiles—is the best type of flooring for building a walk-in shower base. Shower pans come with a threshold and sidewalls to contain the water, but tile can be set into the shower base. This creates a walk-in shower floor that gently slopes toward the drain to keep water from getting out and into the rest of the bathroom.

The lifespan of tile flooring can vary significantly based on the material and maintenance. Generally, tile flooring can last anywhere from 10 to 30 years, but high-quality, well-maintained ceramic tile can last 75 to 100 years. To achieve a longer lifespan, you should clean the tiles and grout regularly, reseal the grout annually, keep the floor dry, and avoid placing extremely heavy items on it to prevent cracking. Choosing a high-quality tile (Grade 1) will also contribute to its longevity.

In most cases, you do not need to put padding or underlayment under carpet tiles. Unlike traditional carpet, which requires a separate pad, carpet tiles are designed to be installed directly onto a firm subfloor like plywood, concrete, or tile. Many carpet tiles come with a built-in underlay and attach with peel-and-stick adhesive, double-sided carpet tape, or glue. For a more comfortable, cushioned feel, especially in residential settings, you can opt for padded carpet tiles that have a thicker underlay attached. While it's generally not recommended to install a separate pad, a compact underlayment might be used in some situations, though this typically requires professional installation. An acoustic underlay may also be considered in commercial spaces or multi-level homes where noise reduction is a priority.

Door transitions can work with virtually any flooring type; however, different transition strips lend themselves better to specific flooring types. For instance, if you are bridging the gap between a taller floor, like carpet, to a shorter floor, like hardwood, then you will want a transition strip with a slight slope to bridge the height difference. These transition strips are called reducer molding. On the other hand, if you are bridging two floors of the same height, you can use flat transition strips, such as T-strips and seam binders.