Get matched with top fencing pros in Lewisville, NC

Most people prefer to keep the fence level by “stepping” the fence when running a horizontal fence over a slope. Stepping involves raising each panel between the posts as the fence moves over changes in slope, giving the fence line the appearance of stair steps. While this may be the preferred method of running a horizontal fence up a slope, there’s nothing wrong with installing your fence so it follows the undulations in the ground instead.

How much does a privacy fence cost? Stockade fences cost $12 to $13 per linear foot for materials. You may find fencing that costs less, but it’s likely wholesale wood manufactured using young trees. Fencing materials made with young trees are less durable than those made with mature trees.

For installation, expect to pay $30 to $80 per hour. Installing a 150- to 200-linear-foot fence takes 20 to 35 hours, which comes to about $600 to $2,800 for labor.

A fence gate can sag for several reasons. The issue often stems from the hardware, such as damaged or bent hinges, or loose screws that can no longer support the gate's weight. The gate frame itself might also have come out of square due to failing supports. Alternatively, the problem may not be the gate but the supporting fence post, which could be leaning or out of place. In many cases, fixing a sagging gate is as simple as tightening the hinge screws or upgrading to more robust hinges.

The best under-gate dog barrier is one that extends to the ground. This effectively keeps dogs in and won't give them room to squeeze through. However, dogs that dig can still get under the barrier. Deter digging by paving the ground beneath the gate or filling it in with rocks or gravel. Be careful using wire to extend dog gates, as the sharp ends may cut or hurt your dog's paws.