Pellet stoves do require electricity to power their automated features, such as the pellet feeder, fans, and digital controls. However, their electricity consumption is relatively low compared to other household appliances. During a power outage, pellet stoves equipped with battery backup systems or manual ignition options can still operate, though fans and automatic feed mechanisms may not function. Have a backup heating plan in place for these situations, especially if you live in a region prone to severe weather events.

The lifespan of an average breaker box is 25 to 40 years, depending on the type and electrical events that occur in your home. Frequent power outages or surges can cause the breaker box’s lifespan to shorten. Maintain this essential electrical component by avoiding turning it off and inspecting it regularly for signs of damage.

It can be safe to buy or live in a house with knob and tube (K&T) wiring, but only if the system is in good condition, functional, and has been thoroughly inspected and approved by a licensed electrician. Never purchase a home with K&T wiring without getting a professional electrical inspection first.

Key considerations include:

• Safety and Condition: An inspector will verify that the wiring is safe and has not deteriorated. Over time, the insulation can wear away, leaving exposed wires that pose a significant fire or shock hazard.

• System Capacity: The electrical service should be at least 60 amps. However, even at this capacity, K&T systems often struggle to handle the demands of modern appliances and electronics.

• Lack of Grounding: Knob and tube wiring is an ungrounded system, which is a safety concern for many modern devices.

• Ongoing Maintenance: If you live in a home with K&T wiring, it's recommended to have it inspected by an electrician every one to two years to ensure it remains in safe working order.

Ultimately, any inspection or modification of a knob and tube system should always be performed by a certified professional.

The common, marked as COM or C, is one of the terminals found in your light switch. It houses the live wire that supplies the input voltage. The other terminals, marked as L1 or L2, are the outputs to the light fixtures. Depending on if you have a one-way or two-way switch, you’ll either have just an L1 terminal or both an L1 and L2 terminal.