Get matched with top well and pump technicians in Caribou, ME

There are several common causes of low water pressure in your sprinkler system, including clogged sprinkler heads and issues with your backflow preventer valve. Start by inspecting and cleaning your sprinkler heads to ensure they’re in working order and there aren’t any blockages. Then, check your backflow preventer valve to ensure it’s open. If you spot damage to it, hire a sprinkler pro to repair or replace it.

Well water can taste different depending on the underground water source it taps into. Some well water tastes slightly sweet, while some may have a slight odor or no taste at all. If you find that you don’t like the taste of well water, a simple drinking water filter can remove most taste and smell.

Most well pump pressure switches have a factory setting of 30 to 50 PSI. There’s some flexibility with this if you’d like a lower or higher water pressure, but remember that it should sit 2 to 3 PSI above your well tank’s general pressure setting.

The inside of your pressure switch cover will usually indicate minimum and maximum settings—going below and above the numbers might damage your well pump.

Yes, you can shock a well yourself, but it can be dangerous if you don’t know what you’re doing. We recommend calling a pro, but if you decide to do it yourself, make sure to follow proper safety precautions. This means wearing the correct safety gear, such as rubber gloves, goggles, and boots. You should also mix the chlorine solution in an open area with plenty of ventilation. Also, make sure not to drink or use the water for a few days afterward, until you’ve flushed the system and retested the water.