Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Hampstead, MD

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Hampstead, MD?

Select your specific project to find the pro for you.

TRUSTED BY HAMPSTEAD, MD HOMEOWNERS

  • Average homeowner rating star icon4.6
    Average homeowner rating
  • Verified reviews icon154
    Verified drywall insulation services reviews

Find Drywall insulation pros in Hampstead

Avatar for Atlas Home Energy Solutions
Atlas Home Energy Solutions
4.1(
34
)
Blown-In Insulation - Install or Upgrade

Serving Hampstead, MD and surrounding areas

Approved

In business since 2009

Free estimates

Credit card accepted

"I hired Atlas Home Energy Solutions to remove old insulation and replace it with the foam technique. However, I ran into numerous unexpected problems due to a slow leak from old pipes. It took awhile to sort out. Atlas Home Energy Solutions gave me lots of expert advice. They were willing to come out and review the situation. They were also willing to reschedule and wait until another contractor dealt with the water issue and its ensuing problems. They helped me make some difficult decisions before they could insulate the crawl space. When it was ready for them to come and insulate the area they bumped their schedule forward to get it done. This company did sterling work. Their expertise and professionalism were outstanding. They really know what they are doing and guided me through a more protracted process than originally envisioned. I would highly recommend them to anyone."
Visual Inspection of all Areas of your Home
Attic Insulation and Air Sealing
Infrared Camera Inspection
Attic Spray Foam
Blower Door Whole House Air Leakage Test

+11

Response time1 day
Recommended by87%of homeowners
Avatar for Home Genius Exteriors
Home Genius Exteriors
4.9(
440
)
Blown-In Insulation - Install or Upgrade

Serving Hampstead, MD and surrounding areas

Approved

In business since 2004

Free estimates

Credit card accepted

"Home Genius Exterior just completed phenomenal work at my property!! Windows and insulation done. â … Top notch service from the consultation, to the schedule work, the start of the tear down, the installing and the final clean up. Highly recommend this company for your home service. Thank you for the hard work and service!"
Roofing
Roofing
Roofing
Roofing
Roofing

+77

Recommended by85%of homeowners
Avatar for ROI Construction LLC
ROI Construction LLC
4.1(
18
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Hampstead, MD and surrounding areas

Approved

In business since 1974

Free estimates

Warranties offered

"This was the second time we hired ROI Construction LLC to work on our home and they did an excellent job both times. Originally our roof was replaced and ROI did a fantastic job, going above and beyond in making sure every detail was perfect. Recently we had the roof and skylights of an addition replaced. In both instances ROI charged less than the competitors and the workmanship was high grade. I highly recommend this company."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+19

47 neighbors recently requested a quote
Recommended by90%of homeowners
Avatar for Atlas Home Energy Solutions LLC
Atlas Home Energy Solutions LLC
4.9(
106
)
Blown-In Insulation - Install or UpgradeInsulation - Install or Upgrade

Serving Hampstead, MD and surrounding areas

In business since 2009

Free estimates

Warranties offered

"Highly recommend. Exceptional and professional service from their contractors and most especially by Nolan Walker (Performance Consultant). Nolan showed photos taken of my home's ductwork and insulation and provided a list of options and the cost of each project so that I could make a well informed choice of which projects to pursue. He took his time and was honest and understanding - not aggressive like other companies I have dealt with. His test-out and follow-up appointment was just as thorough. It was a pleasure working with him."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+16

Response time3 days
Response rate100%
1 neighbors recently requested a quote
Cameron Home Insulation
4.6(
40
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Hampstead, MD and surrounding areas

In business since 1907

Free estimates

Credit card accepted

"Debbie, the AC&R salesperson, was very knowledgeable and confident. They were the 2nd quote I got for work and came in even lower than I expected (which gave me pause as a low bid is a red flag). But true to her word, they did the work professionally (mostly...see below) and promptly. While I had another company do the energy audit for the Pepco rebate, AC&R took over the work, did the blown fiberglass one day and the spray foam the next.



For the blown fiberglass in the attics above our additions, they added spray foam (from a can) around any gaps per the contract and foam board baffles at the soffits. The installer noted that all our soffits were blocked and the batting insulation was too wide for the rafter channels, so he leveled it out as best he could to ensure an even coating of blown insulation. At the end, he sealed up the gaps between the attic and our to-be-finished upstairs (cape cod style, so all one room).



For the spray foam insulation, the team came in the next day, and I had to be out of the house due to fumes. I did come back around noon as they expected to be done well before then. They didn't know I came in and I went to the back of the house to watch TV on my work break. The one annoyance was during their cleanup, one of the installers came down into our kitchen and then saw me. He said he was looking for a vacuum cleaner to clean the stairs. I told him don't worry about the carpet as it was getting pulled up, but this was the one piece of unprofessionalism I noted above. Contractors should NEVER use the homeowner's property; they should bring their own tools, including vacuums!



While the spray foam can get very messy, they kept the splatter mostly contained to inside the crawlspace, not the finished flooring. However, I was surprised that they didn't tape off the outlet covers or light switched. since the particles are so small, we're going to have to replace the switches/receptacles at our cost. Also, there was a storm door screen that wasn't covered and now needs cleaned. Basically, I think they should have taken more care in covering the very few items we left upstairs and the outlets/switches.



They didn't spray around the window frames (large gaps where window weights used to be) because the open cell foam would expand too much. If I wasn't there, I think they would have just left, but it was clear in our contract discussions they needed to insulate those spaces too. They used a few cans of "Good Stuff" equivalent, but didn't fill in the gaps entirely. It did the job well enough, but it's a ding against them as I expected more preparation.



Lastly, I thought that AC&R would walk me through all the scheduling and final "test out" (for the Pepco rebate), but I had to contact them and schedule with someone different each time. They were always prompt, but I expect the experts to know to do this for/with me rather than expect me to know the process. I go through it once in a lifetime while they do it weekly.



While the end of the review sounds more negative than positive, I would definitely recommend AC&R out to others as they're priced right, they have been in business for over a century, and like any contractor, you just need to follow up to be sure everything is done to your satisfaction.
"
Recommended by100%of homeowners
Avatar for Home Energy Loss Professionals (HELP)
Home Energy Loss Professionals (HELP)
4.4(
73
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Hampstead, MD and surrounding areas

In business since 2004

Free estimates

Emergency services offered

"Comprehensive review, took about 2 hours. Checked attic insulation, added insulation to the hot water heater pipes, replaced 14 light bulbs with low energy led bulbs, replaced two shower heads with low water use, also included a better surge protector for the computer."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+1

Recommended by87%of homeowners
Avatar for Mark Group
Mark Group
4.4(
467
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Hampstead, MD and surrounding areas

In business since 1974

Free estimates

Credit card accepted

"Person who visited was very polite and noted that what I purchased was likely not something that would meet my expectations.  I wanted an energy audit, how my systems could be improved in home, lighting, heating, insulation and air conditioners.  What I got was a list of things they could work on and the price to do that work.  The work list in no way was considered an energy audit, rather it was a punch list of things I could do based on their visual inspection.  I did not have a comparison of work and benefit/savings calculation.  There was no checklist of inefficiencies and how that translated into energy losses. For example, multiple hi hat lights in house, they spoke about boxing and insulating a few, less than 10, when I have almost 90 in house.  Overall I was disappointed, the tech who came said the offering needed to be better presented prior to start of work."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+14

Recommended by83%of homeowners
Showing 1-10 of 47
Drywall Insulation questions, answered by experts

Costs depend on damage size, labor rates, and whether additional services like painting are required.

To hide drywall edges, you need to properly apply drywall tape and multiple layers of joint compound. These materials hide the seams between drywall sheets and fill the holes from drywall screws, leaving behind a smooth, flat finish to paint over. Apply joint compound smoothly, and finish the job by sanding the walls to make sure you fully hide drywall edges and other imperfections.

Choose a drill bit that is the size of the screws of the anchors you will use. You aren’t drilling through metal or concrete—hopefully—so any standard twist, wooden or all-purpose drill bit will work fine. It’s also important to have a screwdriver capable of drilling through the drywall and into the stud. The good news is most available drills, even the older ones, can do this with no issue.

Depending on the place where the cutting error occurred, you may be able to fix it. Learning how to patch a hole in drywall is challenging, but if you can tape and mud drywall, you can do it. Having said that, patching is time consuming. Early in the installation process, you may find that it’s easier and far less time consuming to just start over with a new sheet of drywall, cutting a new hole in the right spot. You may be able to use part of the incorrectly cut piece elsewhere, so it’s not completely wasted.

You should do a little bit of sanding between adding coats of mud. Knock down any ridges or significantly imperfect areas through sanding, which should help you apply the next coat of mud smoothly. If your first coat of mud is pretty smooth after it dries, a quick sanding is all you’ll need. Don’t forget to wipe away any dust after each sanding process.

The Hampstead, MD homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.