Get matched with top drain cleaners in Woburn, MA

To unclog a plumbing vent, you first need to locate it. Look at your home's roofline. The plumbing vent will be a vertical pipe sticking straight up from the roof. Since this pipe runs all the way to the main drain underneath your house, you should also be able to find it in the attic.

Bleach is generally not recommended for your shower drains. Although diluted bleach can technically help clean your drain, it will not unclog your pipes. In fact, bleach can harm your plumbing system because it’s so powerful. The bleach can change the color of your sink and even corrode metal pipes and fittings.

Often, people reach for bleach because it's already in their house. But it's worth getting a plunger or a drain snake for the job instead. It'll be a lot less money to buy a new plunger than to pay a plumber to repair or replace damaged pipes.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Liquid drain cleaners are harsh chemicals that can erode your pipes. To treat a slow drain or for preventative maintenance, pour hot water down the drain to break up gunk and help move it along. Make sure the water isn’t boiling hot (keep it under 140 degrees Fahrenheit) if you have plastic pipes. However, you’ll need to pull the clog out for bigger backups.