Get matched with top garbage disposal repair pros in Rockport, MA

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"Great job 👏"

"Went well. pumps replaced"

"Bright knows exactly what he's doing and how to fix a major plumbing issue. Very professional, prompt, has very clear communication, is hard working, very hard working, and personable. He has the proper equipment do diagnose and fix the problem in a timely manner. His knowledge of plumbing is also exemplary. It was a pleasure doing business with him and will hire him for future jobs. Thank you Bright!"

"We have an irrigation well built and serviced by Well Water Connection. John the owner was very responsive, and the irrigation well has been a good investment making watering our green lawn pay for the well in just a couple years since town water is also expensive. Drilling for water around here is tricky, and we have had to figure out how to manage our well water usage. Well Water Connection has been a solid partner in maintaining our irrigation well."

"Joe from All Drain Services stopped by today and unclogged a drain pipe for me in the bathroom."

"Although I am pleased with the completed shower, I did not have a great experience. Mason was the sales man, and he was lovely except during the sales process he showed me doors that they no longer stock. No big deal except the doors that we agreed on were not what was delivered. Jim the project manager came out and measured the enclosure , then ordered what we had agreed and put a deposit on. We were told it may take 10 weeks to come in?. It did. The team came in the following week and removed the old tub and walls, did all the prep and plumbing on Monday. We were told as soon as the plumbing inspector came out , and passed their work they would come right back out and start the installation. Passed at 10 AM Tuesday morning, Jim said he would send a crew that afternoon, no one showed up. This went on till Friday, keep in mind, I only have one shower. Friday arrived, the installer was here with everything needed to install my new shower. About a half hour later the installer let me kn"

"Did exactly what we needed them to quickly and professionally"

"I signed a contract on the first week of June to have PIC Home ?Pros? remodel 3 bathrooms. They stayed for a week in the middle of September, and stopped coming, leaving a vanity in one bathroom, and a shower door in another bathroom completely uninstalled. On the last day here, I was told shower door still has not been manufactured yet, but would take a couple of weeks. They told me that it would cost $150 to have them come back to finish installation, even though contract was for them to complete the work. They ignored my emails to them, so after waiting for 3 weeks and receiving response to my email, I called them, and was told that the shower door is not ready, and even though it?s been 4 months since it was supposed to be ordered, there is still no ETA. I asked that they come back to install the vanity, since we still have no sink in one bathroom. I was told that would cost another $650 to come back and install it. They will work until they are paid in full, then abandon you. "

"Justin was hired to complete minor plumbing repairs totaling $360 paid via Cash App immediately. He was to return to repair one his mistakes as well as provide me a receipt for services that I paid that were completed. After several text messages and a couple of calls reaching out yo him, he did not respond to my text or calls. He never returned after payment. I gave him 3 Stars for lack of professionalism and poor best business practices. "