Get matched with top well and pump technicians in Livermore, KY

You should have your well inspected once per year. You should also have a well inspection done when you’re buying a house with a private well, when the well cap is opened, when the septic tank is repaired, or when there is flooding.

During your annual visit, a pro will make sure that everything is working correctly and check for certain contaminants, including total coliform. Every other year, they’ll look for things like metals and nitrates, and every five years, they’ll test for pesticides.

When testing the pressure of your well tank, the psi should be two below the cut-on pressure. For example, if your tank is set to 40/60, then your pressure should be at 38 psi.

A professional well inspection takes between one and three hours. This includes the time it takes for the inspector to visually check the condition of your well, test its equipment, and collect water for testing. After the pro sends the water samples to the lab, you can expect to receive the results in three to 10 days.

No. Well pump replacement is not recommended as a DIY project, particularly if you have a deep well and a submersible pump. Plumbing and electricity are best left to the pros, especially when something like your well pump includes both. Even when troubleshooting your pump, it pays to have a partner standing by for your assistance and safety.