Get matched with top toilet pros in Evansville, IN

The cost of making a bathroom accessible can be $3,000 to $25,000, but you could spend as much as $50,000 building a brand-new ADA-compliant bathroom. Some bathroom accessibility upgrades to consider include:

• Installing grab bars: $100–$500 

• Lowering cabinets and vanities: $1,200–$2,500

• Installing modified doors: $700–$1,500

• Installing a modified toilet: $400–$1,000

• Installing an accessible sink and faucet: $100–$1,000

• Adding a walk-in tub: $1,100–$17,000

• Converting a bathtub into a walk-in tub: $350–$1,000

• Installing a wheelchair-accessible shower: $2,000–$7,500

• Installing a shower ramp: $16–$300

A running toilet is not a plumbing emergency, but you will want to try some DIY fixes or call in a plumber to prevent wasting gallons of water. The three most common causes of a running toilet are a broken or dirty flapper, an incorrectly sized chain between the flush lever and flapper, or a float that is out of position.

The cost to install a new toilet typically runs from $225 to $530. This doesn’t include the price of the toilet itself, which can cost $90 to $1,500 depending on the model and features you choose. You can save money if you choose to install a toilet yourself. However, you might want to hire a pro for this project.

"Due to the many complexities of replacing a toilet flange, it is typically a job best left to the pros," says Jeff Botelho, Angi Expert Review Board member and plumber. "Many times it isn't as simple and straightforward as 'pop off the old one and pop on a new one' because the flange is either glued on (PVC/ABS), soldered on (brass/copper), or caulked in place with a lead & oakum joint (cast iron) and none of these things can be easily reversed without years of training and repetitive practice."

Toilet handles can get stuck for a couple of reasons, but it’s commonly an issue with the chain. Remove the lid and check the chain’s connection, running from the flapper to the handle arm. Sometimes the chain gets snagged on or against another part of the tank. 

The chain might not have the right tension. For example, a chain that’s too short can make the handle feel stuck. Check that there’s some slack in the chain. Old, worn-out flappers can get stuck, too. In this case, you’ll need to see which size toilet flapper you need.