Best toilet pros near Maxwell, IA

Completing a full standard bathroom remodel offers the best value, with an average return on investment (ROI) of 70%. However, you don't need a full remodel to make an impact. To maximize value, focus on key components like flooring, the tub and shower, vanity, and cabinets. High-value upgrades include installing a walk-in shower, resurfacing a tub, retiling, or expanding the shower. For more budget-friendly options that still increase value, consider repainting with a light, neutral color, or updating the mirror and light fixtures. It's also crucial to address any necessary repairs, such as leaks, mold, or cracked tiles, as buyers will notice these issues. Avoid flashy upgrades like bathtub jets or steam showers, which don't add as much value.

The first step to clearing the air in a line is to locate the cause. This is usually a blockage in either the drain or the venting system. Once you clear the issue, flush the system by actually flushing the toilets repeatedly. This should allow the trapped air to escape, thus clearing the lines. Don’t be surprised if there is increased bubbling as the air makes its way through the system. 

If you’ve accessed the bolts and nuts that hold your toilet seat in place and can’t unscrew them, it’s possible that they were overtightened or that the material corroded over time, making it impossible to unscrew. If that’s the case, you can either call in a plumber for help, or you can DIY a solution if you’re careful. Lay down masking tape around the mounting bracket and then use the tape as a surface to lay a hack saw blade. Move slowly to cut through the bracket and bolt, being careful not to damage the porcelain in the process.

The cost to install a new toilet typically runs from $225 to $530. This doesn’t include the price of the toilet itself, which can cost $90 to $1,500 depending on the model and features you choose. You can save money if you choose to install a toilet yourself. However, you might want to hire a pro for this project.

"Due to the many complexities of replacing a toilet flange, it is typically a job best left to the pros," says Jeff Botelho, Angi Expert Review Board member and plumber. "Many times it isn't as simple and straightforward as 'pop off the old one and pop on a new one' because the flange is either glued on (PVC/ABS), soldered on (brass/copper), or caulked in place with a lead & oakum joint (cast iron) and none of these things can be easily reversed without years of training and repetitive practice."