Get matched with top masons in Eastman, GA

The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you’re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.

Spraying is much faster but may not penetrate the bricks beyond a surface layer. Rolling penetrates the bricks but doesn’t work as well on the mortar. A combination of painting and rolling is your best bet. Using a brush to paint brick isn’t advised because it is time-consuming and won’t penetrate beyond the surface.

The United States Postal Service (USPS) recommends placing a mailbox 6 inches to 8 inches back from the curb. If your lot is unusual, speak with town authorities or the local post office to determine the correct placement.

No, it’s not recommended to attach shutters to brick without drilling. Brick is dense and built to last, so adhesives and shortcut methods don’t usually cut it. Even heavy-duty glue struggles to hold up over time—especially against wind, moisture, and temperature changes. Most no-drill options are made for materials like vinyl or wood, not solid masonry. Skipping the drill might seem easier, but it puts your shutters—and anything below them—at risk. For a secure, lasting install, drilling is the way to go. It takes more effort up front, but the result is safer and more reliable.