Get matched with top masons in Glenwood, GA

Yes, technically, you can pressure wash the paint off of brick. However, you run a much greater risk of damaging the brick and causing serious problems. If you go this route, you’ll still need to carefully choose and apply a chemical paint stripper before washing, following all instructions on the product packaging. Set your power washer to a low pressure to avoid damage.

Brick is the closest choice when seeking to capture the timeless look of stone with a more practical and budget-friendly option. When comparing stone versus brick siding, the price range of $200,000 to $400,000 for average brick home construction is dramatically lower compared to the cost of building a stone home. If you'd like to keep the stone aesthetic without the cost, stone veneer and manufactured stone are both less expensive than real stone.

Yes, as long as the cut is clean and the brick remains structurally sound, you can reuse it. Reusing brick is especially common for landscaping, edging, and small masonry repairs. Just make sure to file down any sharp edges before handling or installing it.

Limewash can be removed from brick, but the method of removal will depend on how long the limewash has been on the brick. If the limewash has fully dried—which happens after about five days—you’ll need to use a diluted muriatic acid mixture to remove it. If there are multiple coats of limewash, you may need to apply the acid mixture several times to fully remove it from the brick.