Get matched with top epoxy flooring pros in Felton, DE

Epoxy coatings for garage floors offer a variety of finish and design options, including:

• Decorative colored flakes: $10 per 250-pound bag

• Metallic epoxy: $5–$12 per square foot

• Rock or stone epoxy: $100 per gallon

• Acrylic and poly-acrylic sealants: $0.85–$1.15 per square foot

• Polyurethane sealant: $0.95–$1.10 per square foot

• Polyurea sealant: $150 per gallon

Yes, you can seal old concrete, but proper preparation is essential. Before sealing, ensure the concrete is clean, dry, and free of any old sealant. To check if resealing is necessary, place a few drops of water on the surface; if they are absorbed in less than five minutes, it's time to reseal. If you are using the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are applying a different type of sealer, the existing one must be removed. Additionally, repair or fill any cracks to create a smooth base before you begin sealing.

Yes, polished concrete floors are worth it for homeowners who want durability, style, and low maintenance in one sleek flooring surface. You get the modern visual appeal of stone or tile with far less upkeep and far less cost. Polished concrete flooring is tough enough for high-traffic areas, it’s a great choice for people with allergies, and it’s easy to clean. If your existing concrete is in good shape, polishing it can give you solid value that shines on for years.

Yes, you can seal old or existing concrete, but proper preparation is crucial. The concrete surface must be clean, dry, and free of any incompatible old sealant. To check if an old sealer is present, drip a few drops of water onto the surface; if the water is absorbed in under five minutes, it's ready to be resealed. If you plan to use the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are using a different type of sealer, the old one must be completely removed. Before applying the new sealer, thoroughly clean the concrete and repair or fill any cracks to ensure a smooth, well-prepared surface.