How Much Does an Epoxy Floor Cost?

Kristin Luna
Written by Kristin Luna
Reviewed by Robert Tschudi
Updated April 29, 2022
Dining and living room
Photo: Filip Miletic / Adobe Stock

The typical cost of epoxying a floor is between $1,475 to $3,080

Get quotes from up to 3 pros!
Enter a zip below and get matched to top-rated pros near you.

If you’re considering tackling a flooring project, chances are you’ve seen applying epoxy as an option. You’ll most often see epoxy floors in garages thanks to its durability, but if you have a slab concrete subfloor beneath your feet, you can potentially use epoxy in any room in your home. Your average epoxy flooring project will cost around $2,298, but your total cost can vary depending on a few different factors.

How Much Does Epoxy Flooring Cost per Square Foot?

The cost to epoxy a concrete floor ranges from $3 to $12 per square foot, with the quality of material used and the project’s overall size affecting your exact cost. Add-ons like transition strips on concrete also have the potential to increase the cost.

“Epoxy flooring—especially in a garage space—is a great value-add to a property,” says Bob Tschudi, Angi Expert Review Board member and general contractor in Raleigh, NC. “But it only works for clients who are committed to having a minimalist footprint—the less stuff, the better!”

How Much Does It Cost to Epoxy a Floor Near You?

The cost of epoxy will vary based on where you live, depending on the availability of experienced contractors, access to materials, and cost of living adjustments. 

Here’s what you can expect to pay to epoxy a floor per room:

CityCost Range
Los Angeles$1,395 – $3,010
Pittsburgh$1,750 – $3,500
New York City$1,705 – $3,720
Miami$1,240 – $2,685
New Orleans$1,300 – $2,140
Portland, OR$1,890 – $3,890
Chicago$1,685 – $2,825
Dallas$1,340 – $2,440

How Much Epoxy Coating Can I Get on My Budget?

Worker installing epoxy flooring
Photo: Chinnabanchon / Adobe Stock

One of the many benefits of epoxy is its affordability; the product is less expensive than installing hardwood or other high-end flooring options, making it able to fit on a variety of budgets. Here’s a breakdown of what square footage you can expect to get on your budget.

$700

With a budget of $700, you can epoxy a floor between 58 and 233 square feet, or the size of a small bathroom.

$1,500

With a budget of $1,500, you can epoxy the floor of a project between 125 and 525 square feet in size, which would coat a typical garage floor.

$2,500

With a budget of $2,500, you can epoxy the floor of a project between 208 and 833 square feet in size, which would easily cover your entire kitchen.

$4,000

With a budget of $4,000, you can epoxy the floor of a project between 333 and 1,333 square feet in size, the larger of which might be an entire basement or top-floor bonus room.

$5,000

With a budget of $5,000, you can epoxy the floor of a project between 417 and 1,667 square feet in size, which could cover your entire apartment or the ground floor of your house.

How Much Does It Cost to Apply Epoxy to Flooring Yourself?

If you’re trying to cut costs, coating a floor in epoxy is one project you can do yourself with a little bit of reading and research. Pouring the epoxy, cleaning and preparing the floor, and doing all the pre-planning for the project will net dramatic savings of between 10 and 40%, depending on the square footage of your home or project. 

If you decide to epoxy your floor yourself, you’ll only have to pay for the materials themselves, but you should also be sure to invest in an organic vapor respirator, power drill, paddle mixer, a box of rubber gloves, and large clean buckets. 

Because epoxy products require the correct PPE and are hazardous to handle, you’ll still need to be very careful. It’s best to tackle this project only if you have prior experience or are willing to take the proper care and time. If you’re unsure of how to use these products safely, it’s best to hire a local professional with epoxy experience.

Cost Breakdown of an Epoxy Flooring Project

Before undertaking any project, it’s wise to understand where all your money will go. For an epoxy floor, the cost breakdown is fairly simple. 

  • Materials: $3–$5 a square foot

  • Labor: $7–$12 a square foot

How Much Does Epoxy Flooring Cost by Style?

The cost to epoxy a floor will run between $2 and $5 per square foot in material to seal your surface with a high-performance epoxy or urethane. If you decide to paint the floor first, estimate an extra $1.45 to $3 per square foot. 

The range in epoxy floor prices comes down to the type of epoxy used. For example, solid epoxy costs two to three times the price of water-based, which might not be ideal for a larger project if budget is a major consideration. However, solid epoxy might be a wise decision in a smaller room since it will last longer and require less maintenance.

Standard Epoxy Sealers

For a lower cost of about $1.50 per square foot, including labor, you can seal a concrete slab with an acrylic-resin or chemically reactive penetrating sealer like silicone. The costs associated with higher-intensity sealers come from their core ingredients. Many have proprietary chemicals that, for example, exceed military specifications and therefore are more expensive than retail products. For your standard home project, these should do the job.

Commercial-Grade Epoxy Coating

If you own outdoor toys like an RV, dual-axle truck, or a boat that you store at your house, you might consider using a commercial-grade coating like 100% solid epoxy or polyurea. Though it will cost more, the higher-quality sealant will likely pay off in the long run for areas like a garage or a driveway.

Preparing the concrete for epoxy is one place to save money in the project. Using an acid etch with water yourself instead of having a professional sandblast with an abrasive is extremely cost-effective. The typical range for sandblasting work is $469 to $1,536, while acid etch chemicals are about $20 per gallon from hardware stores and are generally easy to use with care.

Special Epoxy Features (Metallic, Decorative Flake, or Rock and Pebble)

The look of epoxy is highly customizable. Epoxy floor coating comes in various colors, and there’s the added option to apply colorful epoxy paint coatings. However, neutral colors cost less than their brighter counterparts. Metallic colors range in price from $5 to $12 per square foot

If you’re using epoxy in a highly visible space, you may want to further customize your floor with decorative flakes in clear or colored epoxy. A 1-pound bag of these flakes typically runs about $10 and covers between 125 and 250 square feet.

For an outdoor floor, patio or sidewalk, you might want to use rock and pebble epoxy, which starts around $100 per gallon—not including the cost of the actual pebbles, stones, or decorative rock or the labor to install it. This material can be a way to achieve the look of real stone with the durability and ease of application of epoxy.

What Factors Influence the Cost to Epoxy a Floor?

There are just a couple of cost factors to take into account before proceeding with your flooring project:

  • The size and shape of the floor you want to epoxy

  • The kind of epoxy you choose

  • Customizations like pebble, metallic, or decorative flake

The Floor’s Size

A room with greater square footage will cost more in material and labor should you hire out your epoxy project. A room that is not a standard shape, like a rectangle or square, and has more tricky corners to coat will make for a more complicated and expensive project should you hire out the labor.

The Kind of Epoxy You Choose

Water-based epoxy is the most affordable material to apply; it’s also thinner and spreads easily. The downside is that it’s the least durable, meaning you have to reapply every one to three years. It’s best to use a water-based epoxy in a space where foot traffic is light.

The next level up is a solvent-based epoxy, which is slightly stronger than the water-based material and is relatively easy to apply. However, you’ll need respirators and cooler temperatures for the application process.

The most durable epoxy is the 100% pure solid, which is resistant to heat, chemicals, and scratches. It’s the most expensive and requires professional installation. It’s also not recommended for a space that will be subject to high moisture and extreme temperatures.

FAQs About Epoxy

How do I apply epoxy?

After evaluating the floor to make sure it’s a good candidate for epoxy—for example, epoxy will adhere to concrete but not to hardwood—you’ll want to give the room a solid clean and make sure the floor is dry before you start the process. After the flooring is perfectly clean and dust-free, mix the epoxy according to the directions and start pouring from a corner, keeping in mind that you won’t be able to go back over it until it’s cured. 

You might consider renting a specialized leveling spreader and trowel, which are particularly handy for this project, as is an oversized bucket and mixing paddle for your drill. 

Why should I use epoxy for my flooring project?

Epoxy is heat-, slip-, and crack-resistant and one of the most durable materials out there, which is why it’s so often used for garage floors. It’s easy to keep clean, and it immediately gives a home a modern look. 

It is also a relatively affordable material with many customization options like adding color, a metallic sheen, or features like stone or decorative flake, which makes it a great option for homeowners who want to add a pop to an interior or exterior space. 

The downside of using epoxy is that if you opt for a less-expensive and less-durable coating like a water-based material, you’ll need to reapply it every couple of years. Installation can be messy if you decide to DIY your epoxy floor. It’s also not well-suited for older homes with wood subfloors, as even the smallest flexibility in the substrate will eventually shatter epoxy.

What should I consider when applying an epoxy floor?

Evaluate the substrate and check for potential holes or cracks that need to be sealed first. You should also consider how you’re going to use the room when planning to do an epoxy floor. Having a hard surface on the floor will create echoes, for example, and could cause blinding reflections during certain times of the day. 

Lastly, does your budget include hiring professional help? If not, make sure you feel equipped to pour the epoxy floor yourself.

What other projects should I do at the same time as epoxy?

Taking a room down to its most basic footprint and removing all items presents a unique opportunity to do other projects simultaneously. For example, it would be easy to paint the walls and ceilings without anything cluttering up the room. 

Or, you could install new baseboards once the epoxy has sealed for an updated, trimmed-out look. Also, if any plumbing or drainage issues require cutting into the concrete floor, tackling these repairs before sealing the floor up with epoxy is wise.

Need professional help with your project?
Get quotes from top-rated pros.