Get matched with top fireplace pros in Gold River, CA

There are several ways to determine if your chimney or fireplace damper is open or closed. A simple method is to check for airflow by placing your hand near the fireplace opening; if you feel a draft or hear wind whistling, the damper is open. An open damper might also make the room feel cooler, similar to the outdoor temperature, or cause your HVAC system to work harder than usual. For a more definitive test, you can try a visual inspection, although it may be difficult to see. Alternatively, you can light a small piece of paper and observe the smoke; if it is drawn up the chimney, the damper is open. Always use the damper handle to adjust its position.

Wood fireplace inserts produce more heat without replacing the whole system. A fireplace installer can verify that you have a connector and chimney system to fit the wood-burning insert.

Gas fireplace inserts require less maintenance and are an efficient way to produce warmth. Some can also produce heat in the event of a power outage.

Electric fireplace inserts don't have a real open flame, so they produce flames that mimic a real fire surrounded by artificial logs with LED light. Many electric fireplace inserts produce heat from glowing elements while only using electricity.

A chimney cap costs about $300 on average to install, with prices ranging from $75 to $1,000. The final cost depends on several factors, including the professional you hire, the accessibility of your chimney, the cap's material and size, whether any repairs are needed, and if it requires custom fabrication. Chimney caps are usually made from galvanized steel, stainless steel, or copper. Copper caps are the most expensive, followed by stainless steel and then galvanized steel. Excluding labor, average material costs are around $100 for galvanized steel, $250 for stainless steel, and $600 for copper. You may also face additional costs, such as hiring a chimney sweep to clean the chimney before the cap is installed.

Yes, in most cases, you can remove a fireplace while keeping the chimney. This process requires sealing the chimney at the bottom where it connected to the fireplace and capping it at the top. It is essential to consult a chimney professional or inspection specialist beforehand. They will need to determine if the chimney's structural integrity is sufficient to remain safely in place without the support of the fireplace.