"We are a property management company who uses Arizona Solar Systems, Inc. / AZSS Services for all our electrical needs. With 800 properties in the Phoenix area, we are more than satisfied with each and every job. Quick response, excellent pricing, and above & beyond customer service. Would highly recommend!"
"The problem turned out to be a burned out small electric door switch. I believe the price was way too expensive for the service performed and the price of the door switch. What more can I say? It got done."
"Hale Electric came and ran power and set an RV pedestal for me. The work was done in a timely manner, mess was cleaned up and most of all the work was quality. Thank you!"
"Our main installer was Jesus, and he carefully explained each step of the work and then went over all the information we would need to know. We are very happy with all three items, saving electricity with the SolaTube as we no longer have to turn lights on during the day in our Master bath dressing area, we hope that the Solar attic fan is helping to keep the house cooler by exchanging the air in the attic when it gets hot. In our small home office we replaced an old skylight with new double glass skylight with a shade system and this has made a big difference in the office. Sunshine Experts, LLC did a great job for us and we are very happy to recommend them when anyone asks us about our experience."
"This company is obviously nationwide and hires local contractors. I trusted Agies List that all contractors are licensed, bonded and have background checks. This person was a handyman and not qualified to wall mount, conceal wires, add electrical outlet. He spend five hours in my home, for a job that should have taken two hours and left the area in a disaster. The TV was hung close to the ceiling, the wires were hanging down from the TV, and the receiver was sitting on top of a plaster box because the cord was too short. He was obviously not qualified to install TV wall mounts. I have photos. As soon as he left, I called Best Buy Geek Squad. They were able to come out the next day and mount the TV professionally. I have used the geek squad in Virginia and they are highly qualified. They charge more than this nationwide company but you get what you pay for. I called Angies List the day after the disaster and said i did not want to rate this company but I wanted to talk to a manager. No one called me to apologize. I have cancelled my membership. Do not use this company unless you can be assured that the local contractor is qualified and is licensed. You should never let anyone into your home that has not had background checks. "
My name is Duke I can fix anything, repair anything, install anything under the sun free in-home quote with low prices. Give me a call if you have any handyman needs your satisfaction is guaranteed thank you in advance. I accept Venmo, Zelle and Cash App.
"The electrician Alsup Electric was excellent. Responsive,timely and did what a fine job in fixing the problem I rated B more because of AHS service that was slow and complicated"
The standard copper wire gauge to use with any 30-amp circuit is a 10-gauge wire. The National Electric Code specifies a 10-gauge wire with appliances like water heaters running on 30 amps. If you try to use a smaller gauge wire, such as a 12 gauge, with a 30-amp breaker, you run the risk of the wire overheating and melting or causing a fire. Because of the safety hazards, the gauge of the wire is not an area to try to cut costs when connecting a 30-amp breaker to a water heater.
Yes, you can convert a gas water heater to an electric one, but it is a complex process. You will need to ensure there is adequate power for the new electric unit, as they require more power than gas models. The project also involves safely closing off the gas lines and ventilation, and some cities may require a permit for the conversion. The cost can range from $1,500 to $4,100, depending on the installation scope, plumbing and electrical work, and the water heater model. For an accurate quote, it's best to contact a local professional. Also, be aware that your monthly utility bills may increase after the conversion, as natural gas is typically cheaper than electricity.
A 60W LED bulb is likely labeled as “60W replacement” on the package—that’s because it provides about the same light output as a 60W incandescent bulb. In reality, it likely uses less energy—usually 15 watts or less. If that’s the case, then it’s perfectly fine to put a 60W LED bulb in a 40W socket. Your best bet is to read the package carefully. It will tell you the LED bulb’s actual wattage, and as long as it’s lower than the fixture, the bulb will be safe to use.
You can have power but no lights if the light switch is damaged. A damaged light switch is often caused by regular wear and tear or loose wires. In addition, simple problems such as a burnt-out light bulb or an unplugged lamp could be the cause of not having working lights.
Multiple wire sizes are used for residential electrical purposes. While the most common sizes used in homes are 14 and 12 gauge, some appliances, such as stoves, electric water heaters, central air units, etc., may use larger gauge wire to accommodate their larger amperage. Typically, larger appliances require 10-, 8-, or 6-gauge wires.
The Hotevilla, AZ homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
