Get matched with top plumbers in your area

According to the U.S. Environmental Protection Agency (EPA), a leaky faucet that’s dripping at a rate of one drip per second can waste more than 3,000 gallons of water per year. This is one reason why it’s important to fix a leaky faucet sooner rather than later.

It takes a plumber about two to four hours to remove an old toilet and install a new one. This time increases if the pro finds something unusual during the installation, such as damaged flooring, leaky pipes, or a broken wax ring. Some toilets can take longer to install, like wall-mounted toilets or in-wall-tank toilets, which require your professional to cut into your drywall and repair the area afterward.

In general, PVC (polyvinyl chloride), PEX (polyethylene), and copper are the three piping materials used in new constructions when adding water supply lines. There are some caveats. PEX and copper are considered ideal when running lines that will handle hot water because they are not at risk for melting and warping the way that PVC piping can. At $0.40 to $4 per linear foot, PEX is considered more affordable than copper pipes, which cost $2 to $12 per linear foot. PVC is considered appropriate in water lines for cold taps only.

Yes, plumber's putty ensures a solid bond between the drain assembly and sink. Silicone is a good alternative if you prefer not to use plumber's putty. However, plumber's putty typically isn't visible from the outside of the drain, as you can wipe away any excess when done.