How Much Does It Cost To Ground A House? [2025 Data]

The cost to ground a house or install a grounding rod is $300 on average, but costs range between $200 and $500. Electrical grounding gives excess current a safe route out of your home and into the ground, where it dissipates harmlessly. However, costs can quickly rise if more electrical work is needed to ground the property fully. 

While most modern homes come equipped with a grounding rod already in place, many older properties do not. Ungrounded systems are at an increased risk of electrocution and electrical fires. Let’s review how much it costs to ground a house.

Cost of Grounding Rod Installation

Installing a ground rod—sometimes called an earthing rod—costs between $100 and $300, on average. This estimate assumes a straightforward installation with no access limitations and no hiccups. 

Usually made of copper or coated steel, a grounding rod is placed near your main electrical service panel. You must tie it to your main service panel to provide a proper ground connection. The grounding rod itself costs around $30.

It's important to remember that a grounding rod is just one part of a home's grounding system. A home without a grounding rod in place usually indicates a lack of grounding wires as well. You should hire a licensed local electrician to perform the installation and guide you on the additional steps needed to protect your home from power surges.

Electrician Costs 

You should hire a professional electrician to install a ground rod. Most electricians can tackle this job in less than an hour, but they might charge a minimum callout fee to cover travel costs and other expenses. 

Hiring an electrician costs between $50 and $100 per hour in general. If your home requires running ground wiring to your outlets, you’ll need to plan for more expenses, including:

• Installing an outlet: $300 

• Rewiring: $6,000

Cost by Location

While the grounding material cost is uniform across states, the price you’ll pay for the best electrician varies depending on where you live. Electricians charge between $50 to $100 per hour. Electricians in large cities often charge $100 or more an hour. Those in rural areas charge less, typically around $50 per hour. 

Plus, your jurisdictions might have other requirements that affect your overall project costs. For example, you might need an eight- or 10-foot grounding rod to meet residential electrical service grounding requirements. National Electrical Code might also require copper rods over steel or aluminum, or two rods to achieve the required grounding resistance levels.

Additional Grounding Rod Installation Cost Factors

The price to upgrade your electrical system with grounding methods will vary based on a few factors: labor costs in your area, local code requirements, accessibility, and additional wiring needs.

Accessibility

If your electrician must work on difficult terrain to drive a rod through hard or rocky ground, it will add time to the project and increase the costs.

Number of Grounding Outlets

After installing the grounding rod, you’ll need to tackle the outlets—assuming you already have grounding wiring in place. Grounding an outlet costs between $135 and $300 per socket. This is a pretty simple job that requires switching out a two-pronged outlet for a grounded three-pronged outlet.

Adding Grounding Wiring

Just installing a copper rod and connecting it to your electrical panel won't fully ground your house if there isn't grounding wire running through it. (This is likely the case if your home was built before 1970, when grounded wiring wasn’t required.) Budget for more extensive electrical work to bring your electrical system up to code. 

Grounding wires cost $6 to $8 per linear foot, or roughly $130 to $170 per outlet. If you need to upgrade your knob and tube wiring—meaning, you need to rewire the whole house—costs rise rapidly. Rewiring a house costs $2 to $4 per square foot, or $4,000 to $8,000 to rewire a 2,000-square-foot home.

DIY vs. Hiring a Pro

As with most advanced electrical work, we don’t recommend grounding rod installation as a DIY project. Most local authorities require a licensed electrician to perform electrical work so it’s up to code. They’ll ensure the installation is correct and handle any additional work needed to complete the project, such as rewiring or upgrading outlets or electrical panels.

If your heart is set on a DIY, consider learning how to ground an outlet using your new ground rods to ensure better surge protection. If your outlet is not working, there is a chance that you'll need a pro to fix it, but some troubleshooting would come in handy.

4 Ways You Can Save Money When Installing a Grounding Rod 

Saving money on a grounding project can help you redirect funds toward other home improvements. To save money on the installation, consider the following tips:

• Shop around for materials: Compare prices at different hardware stores and online to find the best deals on grounding rods and related materials. Talk with your electrician to ensure you’re getting the best price on materials. 

• Proper planning: Plan the installation carefully to avoid mistakes that could require additional materials or labor, which add to the overall cost.

• Avoid unnecessary upgrades: Stick to the necessary components and avoid any unnecessary upgrades that can increase costs.

• Get quotes from multiple electricians: Get installation quotes from at least three electricians to see who offers the best deal and service. 

Does Installing a Ground Rod Increase Home Value?

Installing a grounding rod primarily addresses safety and electrical code issues rather than directly improving your home value. Still, it’s something buyers may appreciate, especially considering that proper grounding reduces the risk of electrical shock and fire, making the home safer for future homeowners.