Get matched with top concrete driveway pros in Hulett, WY

Concrete houses cost 10% to 20% more to build than stick-built homes, and maintenance on home systems is more invasive and expensive due to pipes and wires being buried in concrete. Concrete homes can also look more industrial and less comfortable if you don’t cover the concrete with finishing materials. It’s also more challenging to make changes to concrete, so reframing doors and windows or building home additions will cost more. Concrete needs time to cure, too, so the timeline to build a house out of concrete is a bit longer.

A floating slab is a single chunk of concrete that sits directly on flat soil, while a monolithic slab is a single piece of concrete that includes built-in footings that reach several feet below where the majority of the slab sits. Monolithic slabs provide more support, so they’re suitable for home construction, whereas floating slabs get minimal support from the soil directly below and are more common under sheds and detached garages.

Yes, you should screw your flange to the subfloor, including cement. The best way to get this done is to predrill holes into the concrete using a hammer drill and a ¼-inch concrete bit. Be careful when you’re ready to bolt your flange down, as you can accidentally crack it. You can avoid this issue by not installing the screws too deep. Or, you can opt for a flange with a stainless steel ring so you don’t have to worry about cracking the plastic.

Thicker concrete is less likely to crack due to extreme weather changes. At a minimum, concrete slabs should be at least 4 inches, but if you’re worried about the concrete cracking under the weight of heavy machinery or from the freeze-thaw patterns of your climate, you should use even thicker concrete. A professional concrete company near you will be able to advise on the best thickness for your climate and use case.