Top-rated drywall pros.

Get matched with top drywall pros in Gary, WV

Enter your ZIP and get matched with up to 5 pros

Need a pro for your drywall service project in Gary, WV?

Select your specific project to find the pro for you.

Find Drywall pros in Gary

No results for Drywall pro in

Try adjusting your search criteria.
Showing 1-10 of 25
Drywall questions, answered by experts

You should stagger drywall sheets to help prevent cracking. The joints between drywall sheets are the weak spots, so if you install drywall with seams aligned, you’ll create weak lines that run across the length of the wall and extend from floor to ceiling. But when you stagger drywall, the solid sections of panels will support the joints. This can prevent seams from cracking or separating due to fluctuating temperature and humidity, vibrations from movement inside the home, and gravity.

It’s a pretty good idea to have drywall corners, also called drywall beading. Drywall is a pretty brittle material and corners tend to be rubbed up against it often. Rather quickly, the edges will start crumbling and you’ll need to replace the entire panel, or add beads on top and repaint the wall. Drywall beads—which are inexpensive—provide long-term support for the drywall and protect your investment.

Water-damaged drywall should almost always be replaced. Not only does it look bad, it’s a breeding ground for toxic mold. Even if you think the area is dry and there’s no active leak, the only way to be sure is to cut out the damaged area and see for yourself.

Yes, 1/2-inch thick drywall is commonly used for ceilings in residential construction. It provides adequate support and is easier to handle and install compared to thicker drywall sheets. Thicker drywall, such as 5/8-inch, is typically used for ceilings in commercial buildings or areas requiring additional fire resistance or soundproofing. However, for most standard residential applications, 1/2-inch drywall is sufficient and widely accepted.

A 50-pound mirror can be hung on drywall, but only if it has the support of strong hardware. Ideally, you can find the studs behind the drywall and attach the mirror to them; this will give your mirror better stability. Otherwise, confirm that you are using anchors appropriate to the weight of the mirrors. Another technique is to use French cleats—two pieces of wood that fit together, with one piece attached to the wall and the other to the mirror. This allows the weight to be distributed over a wider area.

The Gary, WV homeowners’ guide to drywall services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"